Phase Transformation and Roughening in Artificially Aged and Retrieved Zirconia-Toughened Alumina Femoral Heads

• Published in: The Journal of arthroplasty 2019-04, Vol.34 (4), p.772-780
• Main Authors: Roy, Marie E., Noel, Oscar F., Whiteside, Leo A.
• Format: Article
• Language: English
• Subjects: Aluminum Oxide - chemistry; artificial aging; Ceramics; Femur Head; hip arthroplasty; Hip Prosthesis; Humans; Magnesium Oxide; Materials Testing; retrieval study; Surface Properties; X-Ray Diffraction; Yttrium - chemistry; zirconia-toughened alumina; Zirconium - chemistry
• ISSN: 0883-5403; 1532-8406
• DOI: 10.1016/j.arth.2018.12.025

Zirconia-toughened alumina (ZTA) used in hip arthroplasty contains yttria-stabilized zirconia (Y-TZP) as a toughening agent. However, Y-TZP is well known to degrade in vivo from tetragonal to monoclinic phase transformation. The stability of never-implanted ZTA femoral heads was evaluated in a severe artificial aging test, with retrieved ZTA heads also evaluated for clinical relevance. We hypothesized that ZTA would degrade due to tetragonal-to-monoclinic phase transformation, with changes in surface topography and progressive roughening. Y-TZP specimens served as a positive comparison group, while magnesia-stabilized zirconia (Mg-PSZ), which does not undergo phase transformation, served as a stable comparison group. Monoclinic phase concentration, surface topography, and roughness of never-implanted ZTA, Y-TZP, and Mg-PSZ heads were measured by X-ray diffraction and optical profilometry, before and after 2 rounds of 24 hours of hydrothermal aging. Explanted ZTA heads were characterized by the same methods. After 48 hours in an autoclave, the surface of ZTA heads exhibited irregularly spaced protrusions about 20-30 nm high by 100-150 μm in diameter, with significant increases in monoclinic phase concentration (from 12.2% to 21.3%) and surface roughness. Similar features were observed on the surface of explanted ZTA heads, with 33% monoclinic phase after 2.7 years in vivo. Based on data collected from ZTA retrievals, this artificial aging test underestimated the amount of phase transformation in vivo. Phase transformation and surface roughening of ZTA heads steadily increased without reaching a plateau, which may lead to stress concentrations and weakening of the ceramic material, and could result in late fracture and wear.