Deployment of stent graft in an excessively higher position above the renal artery induces a flow channel to the aneurysm in chimney endovascular aortic aneurysm repair: an in vitro study

• Published in: Journal of artificial organs 2019-09, Vol.22 (3), p.200-206
• Main Authors: Shukuzawa, Kota, Akaoka, Taku, Umezu, Mitsuo, Ohki, Takao, Iwasaki, Kiyotaka
• Format: Article
• Language: English
• Subjects: Aneurysms; Aortic Aneurysm, Abdominal - diagnostic imaging; Aortic Aneurysm, Abdominal - surgery; Aortic aneurysms; Aortography; Biomedical Engineering and Bioengineering; Cardiac Surgery; Cardiovascular system; Channels; Computed tomography; Drains; Endovascular Procedures - instrumentation; Grafting; Gutters; Humans; Implants; Medicine; Medicine & Public Health; Neck; Nephrology; Original Article; Renal artery; Renal Artery - surgery; Repair; Sealing; Silicones; Stents; Surgical implants; Treatment Outcome; X-Ray Microtomography
• ISSN: 1434-7229; 1619-0904
• DOI: 10.1007/s10047-019-01090-x

We aimed to investigate the influences of the sealing length above the renal artery (RA) on gutter formation, non-apposed regions between the aortic wall, stent graft (SG), and chimney graft and incidence of flow channel to the aneurysm in chimney endovascular aortic aneurysm repair (Ch-EVAR) using a juxtarenal abdominal aortic aneurysm model. Neck diameter and length of the silicone model were 24 and 4 mm, respectively. In double Ch-EVAR configuration using Advanta V12, 12 combinations were tested three times with two sizes [28.5 (20%-oversize) and 31 (30%-oversize) mm] of Excluder SG, three sealing lengths above the RA (10, 20, and 30 mm), and two deployment positions (anatomical and cross-leg). Gutter area, non-apposed region, and flow channels to the aneurysm were analyzed using micro-computed tomography. Average gutter area and non-apposed region of 30%-oversize SG were significantly smaller than those of 20%-oversize SG ( p  = 0.05). Furthermore, the non-apposed region of 30%-oversize SG with a 30-mm sealing length was significantly larger than that of the other sealing lengths. For 20%-oversize SGs, flow channel to the aneurysm was observed, except for the anatomical deployment with the sealing length of 10 mm. For 30%-oversize SGs, flow channel was absent, except for the SG with a 30-mm sealing length in both deployment positions. These flow channels were frequently formed through a valley space, existing in the lower unibody above the two limbs. Our data indicated that the optimal sealing length should be chosen in consideration of the device design difference due to the device diameter in Ch-EVAR.