Optically-controlled closable microvalves for polymeric centrifugal microfluidic devices

• Published in: Lab on a chip 2020-04, Vol.2 (8), p.1426-144
• Main Authors: Woolf, M. Shane, Dignan, Leah M, Lewis, Hannah M, Tomley, Christopher J, Nauman, Aeren Q, Landers, James P
• Format: Article
• Language: English
• Subjects: Automation; Closures; Complexity; Electronic devices; Flow control; Fractionation; Lasers; Microfluidic devices; Microfluidics; Optimization; Polymerase chain reaction; Pressure head; Prototyping; Reagents; Solid phases; System effectiveness
• ISSN: 1473-0197; 1473-0189
• DOI: 10.1039/c9lc01187k

Microvalving is a pivotal component in many microfluidic lab-on-a-chip platforms and micro-total analysis systems (μTAS). Effective valving is essential for the integration of multiple unit operations, such as, liquid transport, mixing, aliquoting, metering, washing, and fractionation. The ideal microfluidic system integrates numerous, sequential unit operations, provides precise spaciotemporal reagent release and flow control, and is amenable to rapid, low-cost fabrication and prototyping. Centrifugal microfluidics is an attractive approach that minimizes the need for supporting peripheral hardware. However, many of the microfluidic valving methods described in the literature suffer from operational limitations and fail when high rotational frequencies or pressure heads are required early in the analytical process. Current approaches to valve closure add unnecessary complexity to the microfluidic architecture, require the incorporation of additional materials such as wax, and entail extra fabrication steps or processes. Herein we report the characterization and optimization of a laser-actuated, closable valve method for polymeric microfluidic devices that ameliorates these shortcomings. Under typical operational conditions (rcf ≤605 × g ) a success rate >99% was observed, i.e. successful valve closures remained leak free through 605 × g . Implementation of the laser-actuated closable valving system is demonstrated on an automated, centrifugally driven dynamic solid phase extraction (dSPE) device. Compatibility of this laser-actuated valve closure approach with commercially available polymerase chain reaction (PCR) assays is established by the generation of full 18-plex STR profiles from DNA purified via on-disc dSPE. This novel approach promises to simplify microscale valving, improve functionality by increasing the number of integrated unit operations, and allow for the automation of progressively complex biochemical assays. Microvalving is a pivotal component in many microfluidic lab-on-a-chip platforms and micro-total analysis systems (μTAS).