Superwetting materials for hydrophilic-oleophobic membrane in oily wastewater treatment

• Published in: Journal of environmental management 2021-07, Vol.290, p.112565-112565, Article 112565
• Main Authors: Wan Ikhsan, Syarifah Nazirah, Yusof, Norhaniza, Aziz, Farhana, Ismail, Ahmad Fauzi, Jaafar, Juhana, Wan Salleh, Wan Norharyati, Misdan, Nurasyikin
• Format: Article
• Language: English
• Subjects: Green materials; Hydrophilic-oleophobic; Oil separation; Superwetting materials; Surface modification
• ISSN: 0301-4797; 1095-8630
• DOI: 10.1016/j.jenvman.2021.112565

The vast amount of oily wastewater released to the environment through industrialization has worsened the water quality in recent years, posing adverse impacts on general human health. Oil emulsified in water is one of the most difficult mixtures to be treated, making it imperative for new technology to be explored to address this issue. The use of conventional water treatment such as flotation, coagulation, precipitation, adsorption, and chemical treatment have low separation efficiencies and high energy costs, and are not applicable to the separation of oil/water emulsions. Therefore, there is a demand for more efficient methods and materials for the separations of immiscible oil/water mixtures and emulsions. Superwetting materials that can repel oil, while letting water pass through have been widely explored to fit into this concern. These materials usually make use of simultaneous hydrophilic/oleophobic mechanisms to allow a solid surface to separate oily emulsion with little to no use of energy. Also, by integrating specific wettability concepts with appropriate pore scale, solid surfaces may achieve separation of multifarious oil/water mixtures namely immiscible oil/water blends and consolidated emulsions. In this review, materials used to impart superwetting in solid surfaces by focusing on superhydrophilic/superoleophobic wetting properties of the materials categorized into fluorinated and non-fluorinated surface modification are summarized. In each material, its background, mechanism, fabricating processes, and their effects on solid surface's wetting capability are elaborated in detail. The materials reviewed in this paper are mainly organic and green, suggesting the alternative material to replace the fluorine group that is widely used to achieve oleophobicity in oily wastewater treatment. [Display omitted] •Functional green material.•Inexpensive method.•High performance for oil pollution treatment.