Effective removal of heavy metals from industrial effluent wastewater by a multi metal and drug resistant Pseudomonas aeruginosa strain RA-14 using integrated sequencing batch reactor

• Published in: Environmental research 2021-08, Vol.199, p.111240-111240, Article 111240
• Main Authors: Al-Ansari, Mysoon M., Benabdelkamel, Hicham, AlMalki, Reem H., Abdel Rahman, Anas M., Alnahmi, Eman, Masood, Afshan, Ilavenil, Soundharrajan, Choi, Ki Choon
• Format: Article
• Language: English
• Subjects: Antibiotic resistance; Bacteria; Biosorption; Heavy metals; Sequencing batch reactor; Wastewater
• ISSN: 0013-9351; 1096-0953
• DOI: 10.1016/j.envres.2021.111240

Sequencing batch reactor (SBR) is useful in removal of both non-biodegradable and biodegradable contaminants from wastewater. The main aim of the present investigation was to evaluate the potential of biocatalyst strain RA-14 on heavy metal removal under SBR. The selected strain was screened from the soil sediment contaminated with heavy metals. It was able to survive at different (Hg2+, Pb2+, Zn2+, Cu2+, Cd2+ and Ni2+) heavy metals (>500 ppm). The bacterial strain RA-14 showed maximum bioaccumulation potential than other strains. Heavy metal resistance patterns of Pb2+ > Cu2 > Cd2+ > Hg2+, Ni2+ and Zn2 was observed. Strain RA-14 was resistant to penicillin–G, nalidixic acid, ceftazidime, cefotaxime, kanamycin and ampicillin. The results revealed that bioaccumulation activities were improved at pH 7.0 (83.2 ± 1.8%), 40 °C (89.34 ± 3%) and affected at higher pH values and temperature. The results showed that contact time and initial Lead concentration was also affected Lead accumulation. The heavy metal tolerant strain RA-14 was further investigated towards heavy metal removal in SBR. Heavy metal was removed in SBR within 10 h of hydraulic retention time. Heavy metal removal was high at 2 mg/L (0.33 mg/L Cu2+, 0.33 mg/L Hg2+, 0.33 mg/L Pb2+, 0.33 mg/L Zn2+, 0.33 mg/L Cd2+ and 0.33 mg/L Ni2+) heavy metals. Total nitrogen, biological oxygen demand (BOD) and chemical oxygen demand (COD) of treated water in SBR was removed and the removal efficacy was 91.3 ± 2.1%, 97.6 ± 3.3%, and 94.3 ± 4.4%, respectively in 10 h hydraulic retention time. However, the efficiency of BOD, COD and total nitrogen content removal was decreased, due to the reduced metabolic process of bacteria after 10 h. The SBR reactor proved to be an efficient method for the treatment of various heavy metals from the wastewater. •Pseudomonas aeruginosa reacted to remove Lead from waste water.•>500 ppm of Hg2+, Pb2+, Zn2+, Cu2+, Cd2+, Ni2 has been removed.•Batch reactor removed Pb2+ at 10 h of hydraulic retention time.•>94% of heavy metals were removed from waste water by SBR.•Maximum removal of Lead occurred at pH 7.