Integration of copperas and calcium hydroxide as a chemical coagulant and coagulant aid for efficient treatment of palm oil mill effluent

• Published in: Chemosphere (Oxford) 2021-10, Vol.281, p.130873-130873, Article 130873
• Main Authors: Mohamad, Nurul Aqilah, Hamzah, Sofiah, Che Harun, Mohammad Hakim, Ali, Asmadi, Rasit, Nazaitulshila, Awang, Mohamad, Rahman, Wan Rafizah Wan Abd, Azmi, Alyza Azzura Abd. Rahman, Abu Habib, A.A., Amri Zahid, Mohd Salleh, Fahmi Mustofa, Ahmad Ariff, Latfi, Sa'adah Ahmed, Aripin, Suhaimi Mohd, Saad, Rozano
• Format: Article
• Language: English
• Subjects: Calcium hydroxide; Coagulation; Copperas; Flocculation; POME; Wastewater
• ISSN: 0045-6535; 1879-1298
• DOI: 10.1016/j.chemosphere.2021.130873

Palm oil mill effluent (POME) is highly polluted wastewater that is to the environment if discharged directly to water source without proper treatment. Thus, a highly efficient treatment with reasonable cost is needed. This study reports the coagulation treatment of POME using integrated copperas and calcium hydroxide. The properties of copperas were determined using scanning electron microscopy (SEM), Fourier transform infrared (FTIR), X-ray diffraction (XRD), and X-ray fluorescence (XRF). Coagulation was conducted using jar test experiments for various coagulant formulations and dosages (1000–5000 mg/L), initial pH (4–10), stirring speed (100–300 rpm), and sedimentation time (30–180 min). The characterisation results show that copperas has a compact gel network structure with strong O–H stretching and monoclinic crystal structure. The effectiveness of integrated copperas and calcium hydroxide (Ca(OH)2) with the formulation of 80:20 removed 77.6%, 73.4%, and 57.0% of turbidity, colour, and chemical oxygen demand (COD), respectively. Furthermore, the integration of copperas and Ca(OH)2 produced heavier flocs (ferric hydroxide), which improved gravity settling. The coagulation equilibrium analysis shows that the Langmuir model best described the anaerobic POME sample as the process exhibited monolayer adsorption. The results of this study show that copperas with the aid of Ca(OH)2 demonstrated high potential in the removal of those parameters from POME with acceptable final pH for discharge. The utilisation of this by-product as a coagulant in effluent treatment can unlock the potential of copperas for wider applications, improve its marketability, and reduce gypsum waste generation from the TiO2 industry. [Display omitted] •Integration of copperas and calcium hydroxide promotes heavier flocs formation.•Positive value of zeta potential for hybrid coagulant improves its efficiency.•Hybrid coagulant with formulation 80:20 CL shows optimum performance.•Copperas/calcium hydroxide enhances colour removal in POME.