Biosorption of LMW PAHs on activated sludge aerobic granules under varying BOD loading rate conditions

Polycyclic aromatic hydrocarbons belong to the main priority substances for the aquatic environment. One of the emission sources of these compounds to environment is wastewater discharged from conventional wastewater treatment systems, which are not designed to cope with this type of pollution. Thus...

Full description

Saved in:
Bibliographic Details
Published in:Journal of hazardous materials 2021-09, Vol.418, p.126332-126332, Article 126332
Main Authors: Ofman, Piotr, Skoczko, Iwona, Włodarczyk-Makuła, Maria
Format: Article
Language:English
Subjects:
GSBR
LMW PAH
PAH biosorption
Citations: Items that this one cites
Items that cite this one
Online Access:Get full text
Tags: Add Tag
No Tags, Be the first to tag this record!
Description
Summary:Polycyclic aromatic hydrocarbons belong to the main priority substances for the aquatic environment. One of the emission sources of these compounds to environment is wastewater discharged from conventional wastewater treatment systems, which are not designed to cope with this type of pollution. Thus, due to the widely discussed properties of aerobic granular activated sludge in the literature – a conducted study has proven its ability to remove LMW PAHs (naphthalene (Nap), acenaphthylene (Acy), acenaphthene (Ace), fluorene (Flu), phenanthrene (Phe) and anthracene (Ant)) from wastewater by biosorption process at varying loadings of organic compounds expressed as BOD (kg/kg·d) on the activated sludge mass. The maximum biosorption of Nap was 605 µg/kgd.m., Acy equals to 134 µg/kgd.m., Ace equals to 355 µg/kgd.m. Flu equals to 104 µg/kgd.m. Phe equal to 204 µg/kgd.m. and Ant equal to 173 µg/kgd.m. The study showed that the BOD loading rate is one of the factors affecting the biosorption process of LMW PAHs. However, as the amount of adsorbed LMW PAHs increased, the condition of aerobic granular activated sludge deteriorated, which was evidenced by gradual increase in the values of technological parameters of activated sludge (SVI, HRT, SRT) and a smaller increase in activated sludge dry mass. [Display omitted] •Based on mass balance biosorption is main process of LMW PAHs removal from sewage.•LMW PAHs biosorption depends on sludge BOD loading and sludge dry mass growth.•Theoretical biosorption value of LMW PAHs is higher compared to the actual process.•Obtained results can be used in PAHs removal control during wastewater treatment.
ISSN:0304-3894
1873-3336
DOI:10.1016/j.jhazmat.2021.126332