The effect of cold deformation on the structure, texture and properties of yttrium high temperature superconducting powders and strips

• Published in: Journal of the less-common metals 1991-09, Vol.175 (1), p.29-36
• Main Authors: Shamrai, V.F., Pimenov, A.F., Efimov, Yu.V., Babareko, A.A., Karelin, F.R., Choporov, V.F., Frolova, T.M., Myasnikova, E.A., Postnikov, A.M.
• Format: Article
• Language: English
• Subjects: Applied sciences; Cross-disciplinary physics: materials science; rheology; Exact sciences and technology; Materials science; Metals. Metallurgy; Phase diagrams and microstructures developed by solidification and solid-solid phase transformations; Physics
• ISSN: 0022-5088
• DOI: 10.1016/0022-5088(91)90347-7

Cold deformation of YBa 2Cu 3O 7 − x (phase 123, T c = 88.5–92 K) powders and strips causes partial decomposition of the 123 phase, a reduction in the degree of orthorhombicity of the structure up to almost complete degradation, and a decrease in T c . When they are deformed, yttrium high temperature superconductors acquire basal (001) [110] texture with high pole density (13–15 arbitrary units), low scattering angle (±6°–7° from the normal direction), and a weak preference for a, b or a + b in the rolling direction; traces of (139) orientations may also be found. This texture is known to be favourable for increasing j k . The combined effect of cold deformation and a carbon-containing binder leads, however, to a complete loss of superconductivity at 77 K or above. Depending on the regime of subsequent annealing, the following effects may be observed: degradation of the orthorhombic structure with a decrease in T c ; restoration of the orthorhombic structure and T c of the 123 phase with complete or substantial loss of basal-type texture; change in texture type or retention of the basal texture ( p α = 0 (005) = 6–7 arbitrary units) with restoration of the orthorhombic lattice and T c of the 123 phase. The appearance of a set of orientations from (139) to (001) in the deformation texture is evidence for the process of recrystallization grain growth. This suggests the appearance of plastic deformation of the ceramics (most probably of the shear type). With long annealing and thermocycling, the basal texture changes in accordance with the theory of compromise recrystallization grain growth up to the restoration of basal texture.