The formation of hydrogen permeation barriers on steels by aluminising

• Published in: Journal of nuclear materials 1991-05, Vol.182, p.36-51
• Main Authors: Forcey, K.S., Ross, D.K., Wu, C.H.
• Format: Article
• Language: English
• Subjects: Applied sciences; Controled nuclear fusion plants; Energy; Energy. Thermal use of fuels; Exact sciences and technology; Installations for energy generation and conversion: thermal and electrical energy
• ISSN: 0022-3115; 1873-4820
• DOI: 10.1016/0022-3115(91)90413-2

An extensive investigation has been carried out into the effectiveness of aluminised layers as permeation barriers on AISI 316L stainless and DIN 1.4914 martensitic steels. The study involved measurement of the hydrogen permeation rate through commercially aluminised steel discs of thicknesses in the range 1–1.6 mm, at temperatures between 250 and 600 °C and for an upstream hydrogen pressure of 10 5 Pa. The composition and structure of the aluminide layers were investigated by a number of techniques such as SEM, electron beam microprobe and X-ray diffraction. Accelerator based techniques such as RBS and NRA were employed to study the top micron or so of the surfaces of the samples. By these techniques it was found that the effectiveness of the permeation barrier depended on the formation of a thin surface oxide layer consisting of Al 2O 3. It was found that the permeation rate through the aluminised steels could be reduced by 3–4 orders of magnitude by forming a surface oxide layer up to a micron or so in thickness.