Recycling of synthetic waste wig fiber in the production of cement-adobe for building envelope: physio-hydric properties

• Published in: Environmental science and pollution research international 2022-05, Vol.29 (23), p.34075-34091
• Main Authors: Akinwande, Abayomi Adewale, Balogun, Oluwatosin Abiodun, Romanovski, Valentin, Danso, Humphrey, Ademati, Akeem Oladele, Adetula, Yomi Vincent
• Format: Article
• Language: English
• Subjects: Absorption; Aquatic Pollution; Atmospheric Protection/Air Quality Control/Air Pollution; Bricks; Building envelopes; Bulk density; Cement; Clay; Clay soils; Composite materials; Dimensional stability; Earth and Environmental Science; Ecotoxicology; Environment; Environmental Chemistry; Environmental Health; Environmental science; Landfills; Masonry; Membrane permeability; Moisture absorption; Moisture effects; Moisture resistance; Permeability; Permeability coefficient; Porosity; Recycling; Research Article; Sample preparation; Sand; Shrinkage; Soil permeability; Soil porosity; Waste disposal sites; Waste Water Technology; Water absorption; Water Management; Water Pollution Control; Weight loss
• ISSN: 0944-1344; 1614-7499
• DOI: 10.1007/s11356-022-18649-6

Waste wigs are often disposed off in their volume on landfills, thus constituting a nuisance to the environment. Recycling these wigs in masonry bricks is a way via which they can be recycled and reused. On such premise, waste wig fiber (WWF) was recycled by incorporating into the cement-sand-clay composite mix for masonry bricks production. The challenges masonry bricks face include shrinkage and water susceptibility; hence, the contributory effect of WWF on physio-hydric properties was assessed in this study. Sample preparation entailed blending of cement, sand, clay soil, and waste wig fiber. The control mix was prepared by commixing clay with 10% cement (by clay volume) and 20% sand (by clay volume). Other mix proportions were reinforced with 1, 2, 3, 4, and 5% WWF by clay volume. Prepared composite brick samples were cured for 28 and 56 days and tested for physio-hydric properties. Results revealed WWF contributed significantly in improving hydro-resisting properties by minimizing porosity, water and moisture absorption, capillary suction, and water permeability. Furthermore, WWF contributed to dimensional stability by reducing shrinkages and weight loss. Hydration time impacts significantly in reducing apparent porosity, water permeability coefficient, moisture and water absorption, and capillary suction coefficient and increasing apparent density, weight loss, linear, and volumetric shrinkage. The general outcome depicts that WWF showed promising performance in bricks developed in enhancing water and moisture susceptibility resistance and promoting mass and dimensional stability, hence can be employed in reinforcing cement adobe bricks at an optimum mix of 5% vol fraction.