Regulable Supporting Baths for Embedded Printing of Soft Biomaterials with Variable Stiffness

• Published in: ACS applied materials & interfaces 2022-09, Vol.14 (37), p.41695-41711
• Main Authors: Li, Qi, Ma, Liang, Gao, Ziqi, Yin, Jun, Liu, Peng, Yang, Huayong, Shen, Luqi, Zhou, Hongzhao
• Format: Article
• Language: English
• Subjects: Biological and Medical Applications of Materials and Interfaces
• ISSN: 1944-8244; 1944-8252
• DOI: 10.1021/acsami.2c09221

Three-dimensional (3D) embedded printing is emerging as a potential solution for the fabrication of complex biological structures and with ultrasoft biomaterials. For the supporting medium, bulk gels can support a wide range of bioinks with higher printing resolution as well as better finishing surfaces than granular microgel baths. However, the difficulties of regulating the physical properties of existing bulk gel supporting baths limit the further development of this method. This work has developed a bulk gel supporting bath with easily regulable physical properties to facilitate soft-material fabrication. The proposed bath is composed based on the hydrophobic association between a hydrophobically modified hydroxypropylmethyl cellulose (H-HPMC) and Pluronic F-127 (PF-127). Its rheological properties can be easily regulated; in the preprinting stage by varying the relative concentration of components, during printing by changing the temperature, and postprinting by adding additives with strong hydrophobicity or hydrophilicity. This has made the supporting bath not only available for various bioinks with a range of printing windows but also easy to be removed. Also, the removal strategy is independent of printing conditions like temperature and ions, which empowers the bath to hold great potential for the embedded printing of commonly used biomaterials. The adjustable rheological properties of the bath were leveraged to characterize the embedded printing quantitatively, involving the disturbance during the printing, filament cross-sectional shape, printing resolution, continuity, and the coalescence between adjacent filaments. The match between the bioink and the bath was also explored. Furthermore, low-viscosity bioinks (with 0.008–2.4 Pa s viscosity) were patterned into various 3D complex delicate soft structures (with a 0.5–5 kPa compressive modulus). It is believed that such an easily regulable assembled bath could serve as an available tool to support the complex biological structure fabrication and open unique prospects for personalized medicine.