Understanding the potential and pH dependency of high-strength β-titanium alloy environmental crack initiation

• Published in: Metallurgical and materials transactions. A, Physical metallurgy and materials science Physical metallurgy and materials science, 1997-12, Vol.28 (12), p.2645-2656
• Main Authors: KOLMAN, D. G, SCULLY, J. R
• Format: Article
• Language: English
• Subjects: Acidification; Applied sciences; Circuits; Crack initiation; Crack propagation; Crack tips; Cross-disciplinary physics: materials science; rheology; Dissolution; Exact sciences and technology; Fatigue, corrosion fatigue, embrittlement, cracking, fracture and failure; Fatigue, embrittlement, and fracture; High strength alloys; Hydrogen; Hydrogen embrittlement; Hydrogen ingress; Materials science; Metals. Metallurgy; Ohmic drop; Physics; Plastic deformation; Room temperature; Rupture; Strain rate; Titanium alloys; Titanium base alloys; Treatment of materials and its effects on microstructure and properties; Voltage drop
• ISSN: 1073-5623; 1543-1940
• DOI: 10.1007/s11661-997-0021-x

An explanation for the strong dependency of crack initiation of precracked high-strength β-titanium alloys in room-temperature 0.6 M NaCl on applied potential and bulk-solution pH is presented. It is proposed that environment-assisted cracking (EAC) susceptibility in neutral aqueous NaCl results from (1) film rupture due to plastic deformation at actively deformed crack tips, (2) accelerated dissolution of titanium, (3) crack tip acidification by hydrolysis of titanium ions, (4) crack tip potential excursions toward bare metal open-circuit potentials (OCPs) during film rupture due to large ohmic voltages in the crack solution, (5) accelerated crack tip proton or water reduction concurrent with titanium dissolution, (6) bare surface-dominated hydrogen ingress into a fracture process zone, and (7) crack initiation by hydrogen embrittlement. Evidence for each of the above stages of the crack initiation scenario is presented, with emphasis on crack tip electrode kinetics and ohmic voltage calculations which govern process zone-controlled hydrogen uptake. The seven stages are consistent with the strong dependencies of crack initiation and growth in precracked high-strength β-titanium alloys on (1) solution pH, (2) applied potential, and (3) strain rate, and they explain the “apparent” EAC resistance of smooth- and blunt-notch specimens. The latter lack both occluded crack tip geometries to promote acidification and ohmic voltage drops below reversible hydrogen, as well as localization of dynamic plastic strain. Hydrogen uptake is, subsequently, limited.