Simple Construction of Multistage Stable Silicon–Graphite Hybrid Granules for Lithium‐Ion Batteries

• Published in: Small (Weinheim an der Bergstrasse, Germany) Germany), 2023-04, Vol.19 (17), p.e2207167-n/a
• Main Authors: Zhang, Jiapeng, Wang, Dengke, Yuan, Renlu, Li, Xiaotian, Li, Jiangchuan, Jiang, Zhijie, Li, Ang, Chen, Xiaohong, Song, Huaihe
• Format: Article
• Language: English
• Subjects: Anodes; Carbonization; Granular materials; Granulation; Graphite; Lithium-ion batteries; Nanoparticles; Nanotechnology; powder engineering strategies; Silicon; silicon–graphite composites; stable structures; Stress concentration
• ISSN: 1613-6810; 1613-6829
• DOI: 10.1002/smll.202207167

Because of its high specific capacity, the silicon–graphite composite (SGC) is regarded as a promising anode for new‐generation lithium‐ion batteries. However, the frequently employed two‐section preparation process, including the modification of silicon seed and followed mixture with graphite, cannot ensure the uniform dispersion of silicon in the graphite matrix, resulting in a stress concentration of aggregated silicon domains and cracks in composite electrodes during cycling. Herein, inspired by powder engineering, the two independent sections are integrated to construct multistage stable silicon–graphite hybrid granules (SGHGs) through wet granulation and carbonization. This method assembles silicon nanoparticles (Si NPs) and graphite and improves compatibility between them, addressing the issue of severe stress concentration caused by uncombined residue of Si NPs. The optimal SGHG prepared with 20% pitch content exhibits a highly reversible specific capacity of 560.0 mAh g−1 at a current density of 200 mA g−1 and a considerable stability retention of 86.1% after 1000 cycles at 1 A g−1. Moreover, as a practical application, the full cell delivers an outstanding capacity retention of 85.7% after 400 cycles at 2 C. The multistage stable structure constructed by simple wet granulation and carbonization provides theoretical guidance for the preparation of commercial SGC anodes. Inspired by powder engineering, using simple method integrates silicon modification and preparation of silicon‐graphite composites, constructing multistage stable structure anode with high density and long service life.