Biosorption of copper by Sphaerotilus natans immobilised in polysulfone matrix: equilibrium and kinetic analysis

• Published in: Hydrometallurgy 2003-07, Vol.70 (1), p.101-112
• Main Authors: Beolchini, F., Pagnanelli, F., Toro, L., Vegliò, F.
• Format: Article
• Language: English
• Subjects: Applied sciences; Biosorption; Copper; Exact sciences and technology; Hydrometallurgy; Immobilised biomass; Kinetic modelling; Metals. Metallurgy; Polysulfone; Production of metals; Production of non ferrous metals. Process materials; Sphaerotilus
• ISSN: 0304-386X; 1879-1158
• DOI: 10.1016/S0304-386X(03)00049-5

Copper biosorption by Sphaerotilus natans immobilised in polysulfone matrices has been studied. Firstly, a rough characterisation of biosorbent beads has been performed, and operating conditions for beads preparation aimed at biosorption have been optimised. Then, the equilibrium of the process was studied in order to determine the effect of pH and biomass concentration inside beads; experimental data were successfully fitted by the Langmuir equation, and the highest value for loading was 5.4 mg/g estimated at pH 5.5 and 0.18 g of lyophilised biomass per gram of beads. Biosorption kinetics has also been studied, and an original kinetic model was developed which is able to correlate experimental data. This model was developed from the Shrinking Core Model, considering a variable copper diffusion coefficient dependent on the process conversion. The estimated values for copper diffusion coefficient were obviously lower than copper diffusivity in water, and they depend on biomass concentration inside beads. Beads regeneration was studied using EDTA, HCl and CaCl 2. Satisfactory biosorption performances were observed also after 10 sorption/desorption cycles, with CaCl 2 as regeneration solution. All the results confirmed the technical feasibility of the biosorption process by a polysulfone-entrapped biomass even though biosorption efficiency should be improved.