The Effects of the Oxygen-enriched Surface Layer on Mechanical Properties of α+β Type Titanium Alloys

• Published in: ISIJ International 2005, Vol.45(1), pp.133-141
• Main Authors: FUKAI, Hideaki, IIZUMI, Hiroshi, MINAKAWA, Kuni-nori, OUCHI, Chiaki
• Format: Article
• Language: English
• Subjects: Applied sciences; ductility; Exact sciences and technology; Fatigue; fatigue strength; hardness; Mechanical properties and methods of testing. Rheology. Fracture mechanics. Tribology; Metals. Metallurgy; oxidation; oxygen-enriched layer; superplastic forming; α+β titanium alloy; α-case
• ISSN: 0915-1559; 1347-5460
• DOI: 10.2355/isijinternational.45.133

The effects of heat treating conditions on thickness of the oxygen-enriched layer or α-case in Ti-4.5%Al-3%V-2%Fe-2%Mo alloy were studied in comparison with Ti-6%Al-4%V alloy, and then the effects of these layers on the mechanical properties were investigated. The higher heating temperature and an extended heating time increased oxygen-enriched layer or α-case thickness in Ti-4.5%Al-3%V-2%Fe-2%Mo alloy, and atmospheric heating using high purity argon gas with 99.999% purity could not prevent formation of the oxygen-enriched layer even by heating at such a low temperature as 998 K. The 30 μm thick oxygen-enriched layer without α-case was formed by heat treating at 1048 K for 3.6 ks in use of 99.9% purity argon gas which corresponded to the typical heating conditions adopted in a practical superplastic forming (SPF) operation using Ti-4.5%Al-3%V-2%Fe-2%Mo alloy. The thickness of both surface layers in Ti-6%Al-4%V alloy was much thicker than Ti-4.5%Al-3%V-2%Fe-2%Mo alloy because of its higher heating temperature. Tensile elongation, fatigue strength and bendability were deteriorated with the increase of oxygen-enriched layer or α-case thickness, and removal of these layers by pickling treatment fully recovered these properties to an original level. Deterioration of the mechanical properties was exerted by existence of the surface layer with high hardness, and in particular, the oxygen-enriched layer with α-case decreased fatigue strength more pronouncedly compared with the surface layer without α-case. Existence of brittle surface layer with high hardness and the coarse grain size in α-case appeared to be responsible for accelerated formation of microcrack at the surface of the mechanical testing specimens, resulting in deterioration of various properties.