Bubble dynamics in microchannels. Part II: two parallel microchannels

• Published in: International journal of heat and mass transfer 2004-12, Vol.47 (25), p.5591-5601
• Main Authors: Li, H.Y., Tseng, F.G., Pan, Chin
• Format: Article
• Language: English
• Subjects: Applied sciences; Boiling heat transfer; Bubble dynamics; Electronics; Exact sciences and technology; Micro- and nanoelectromechanical devices (mems/nems); Microchannels; Onset nucleate boiling; Semiconductor electronics. Microelectronics. Optoelectronics. Solid state devices; Slug flow
• ISSN: 0017-9310; 1879-2189
• DOI: 10.1016/j.ijheatmasstransfer.2004.02.032

The present work investigates experimentally the bubble dynamics in two parallel trapezoidal microchannels with a hydraulic diameter of 47.7 μm for both channels. The fabrication process of the two parallel microchannels employs a silicon bulk micromachining and anodic bounding process. The results of this study demonstrate that the bubble growth and departure is generally similar to that in a single microchannel, i.e., bubbles, in general, grow linearly with time and their departure is governed by surface tension and drag due to bulk two-phase flow. For the two low mass flow rates, the growth of bubble in slug flow is also investigated. It is found that the bubble grows in the axial direction both forward and backward with its length increases exponentially due to evaporation of the thin liquid film between the bubble and heating wall. However, the coefficient of exponent is much smaller than that caused by evaporation due to the limitation effect of liquid pressure around the bubble.