Carbon nanotube forests: a non-stick workbench for nanomanipulation

• Published in: Nanotechnology 2006-10, Vol.17 (19), p.4917-4922
• Main Authors: Gjerde, Kjetil, Kjelstrup-Hansen, Jakob, Clausen, Casper H, Teo, Kenneth B K, Milne, William I, Rubahn, Horst-Günter, Bøggild, Peter
• Format: Article
• Language: English
• ISSN: 0957-4484; 1361-6528
• DOI: 10.1088/0957-4484/17/19/023

The ubiquitous static friction (stiction) and adhesion forces comprise a major obstacle in the manipulation of matter at the nanoscale (Falvo et al 1999 Nature 397 236; Urbakh M et al 2004 Nature 430 525). In this work it is shown that a surface coated with vertically aligned carbon nanotubes- nanotube forestcts as an effective non-stick workbench for the manipulation of micro-objects and fibres/wires with one or more dimensions in the nano-range. These include organic nanofibres (Balzer and Rubahn 2001 Appl. Phys. Lett. 79 3860) and microsized latex beads, which adhere strongly even to a conventional low surface-energy material like Teflon. Although organic nanofibres are attractive as device components due to their chemical adaptability, adhesion forces nearly always rule out manipulation as a route to assembly of prototype devices based on such materials, because organic materials are soft and fragile, and tend to stick to any surface. We demonstrate here that the nanotube forest due to its roughness not only exhibits very low stiction and dynamic friction; it also acts as a springy and mechanically compliant surface, making it possible to lift up and manipulate delicate nanostructures such as organic nanofibres in ways not possible on planar, rigid surfaces.