Limit-State Curve of Base-Course Material and Its Relevance for Resilient Modulus Testing

The limit state characteristics of base-course granular materials were obtained using a typical triaxial testing equipment devoted to the measurement of resilient modulus. Accurate monitoring of axial strain during isotropic and anisotropic compression was used to determine the stress conditions whe...

Full description

Saved in:
Bibliographic Details
Published in:Journal of geotechnical and geoenvironmental engineering 2006-02, Vol.132 (2), p.173-182
Main Authors: Konrad, J. M, Juneau, O
Format: Article
Language:English
Subjects:
Applied sciences
Buildings. Public works
Exact sciences and technology
Geotechnics
Soil investigations. Testing
TECHNICAL PAPERS
Citations: Items that this one cites
Items that cite this one
Online Access:Get full text
Tags: Add Tag
No Tags, Be the first to tag this record!
Description
Summary:The limit state characteristics of base-course granular materials were obtained using a typical triaxial testing equipment devoted to the measurement of resilient modulus. Accurate monitoring of axial strain during isotropic and anisotropic compression was used to determine the stress conditions where significant irrecoverable strains occur for samples prepared by static compression, Proctor rammer, and vibratory compaction. The limit state curve is highly anisotropic, centered about the q∕p=1 line. It is sensitive to sample preparation technique and fines content. The Strategic Highway Research Program (SHRP) procedure corresponds to stress paths during conditioning and repeated loading that remain within the limit state curve of the control base course material containing 3.5% fines. The resilient modulus values reflect henceforth the behaviour of the same material with its original particle contact distribution. The Laboratoires des Ponts et Chaussées (LCPC) procedure is characterized by stress paths that cross the original limit state curve of the Proctor compacted samples. Particle contact distribution changes thus continuously as the limit state curve expands in response to the various stress paths used in this procedure. The resilient modulus values correspond to samples with different fabrics. A simple procedure based on isotropic loading has been proposed for the determination of a simplified limit state curve of base course materials with the intent of specifying the testing conditions for obtaining adequate resilient modulus values.
ISSN:1090-0241
1943-5606
DOI:10.1061/(ASCE)1090-0241(2006)132:2(173)