Organic solar cells consisting of stacked amine–thiophene copolymer and 3,4,9,10-perylenetetracarboxyl-bis-benzimidazole layers

• Published in: Solar energy materials and solar cells 2007-05, Vol.91 (8), p.745-750
• Main Authors: Li, Jian, Osasa, Takahiro, Hirayama, Yasuko, Sano, Takeshi, Wakisaka, Kenichiro, Matsumura, Michio
• Format: Article
• Language: English
• Subjects: Amine–thiophene copolymer; Annealing; Applied sciences; Energy; Exact sciences and technology; Natural energy; Organic solar cell; Photovoltaic conversion; Solar cells. Photoelectrochemical cells; Solar energy
• ISSN: 0927-0248; 1879-3398
• DOI: 10.1016/j.solmat.2007.01.003

Organic solar cells were fabricated using a new amine–bithiophene copolymer as an electron donor layer and 3,4,9,10-perylenetetracarboxyl-bis-benzimidazole (PV) as an electron acceptor layer. The amine–thiophene copolymer, poly{(9,9-dioctylfluorene-2,7-diyl)- co-[ N, N′-bis(4- tert-butylphenyl)benzidine- N, N′-bis(phenylene-4,4′-diyl)]- co-(2,2′-bithiophene-5,5′-diyl)} (PF8-TPD-T2), had a glass transition temperature ( T g) at about 77 °C, and exhibited liquid crystalline states and a high hole mobility. The rigid bithiophene units in the polymer chain are probably responsible for the formation of the liquid crystalline states and the high hole mobility. A solar cell made of the PF8-TPD-T2 copolymer and PV layers showed a photocurrent density of 0.99 mA/cm 2, an open-circuit voltage of 0.61 V, and an energy conversion efficiency of 0.332%. The photocurrent of the solar cells was generated at both the copolymer and PV layers, and the copolymer layer was the main contributor to photocurrent when the thickness of the polymer was about 17 nm. After annealing the solar cells at temperatures well above the glass transition temperature ( T g) of the copolymer, the photocurrent action spectra of the solar cells were broadened and the performance was improved. The changes were mostly due to the increased contribution of the PV layer to the photocurrent by the annealing.