On the sharpness of straight edge blades in cutting soft solids: Part I – indentation experiments

• Published in: Engineering fracture mechanics 2007-09, Vol.74 (14), p.2205-2224
• Main Authors: McCarthy, C.T., Hussey, M., Gilchrist, M.D.
• Format: Article
• Language: English
• Subjects: Crack initiation; Cutting mechanics; Exact sciences and technology; Fracture mechanics (crack, fatigue, damage...); Fundamental areas of phenomenology (including applications); Indentation; Mechanical contact (friction...); Physics; Polymers; Sharpness; Soft solids; Solid mechanics; Structural and continuum mechanics
• ISSN: 0013-7944; 1873-7315
• DOI: 10.1016/j.engfracmech.2006.10.015

The sharpness of a blade is a key parameter in cutting soft solids, such as biological tissues, foodstuffs or elastomeric materials. It has a first order effect on the effort, and hence energy needed to cut, the quality of the cut surface and the life of the cutting instrument. To date, there is no standard definition, measurement or protocol to quantify blade sharpness. This paper derives a quantitative index of blade sharpness via indentation experiments in which elastomeric materials are cut using both sharp and blunt straight edge blades. It is found that the depth of blade indentation required to initiate a cut or crack in the target material is a function of the condition or sharpness of the blade’s cutting edge, and this property is used to formulate a so-called “blade sharpness index” (BSI). It is shown theoretically that this index is zero for an infinitely sharp blade and increases in a quadratic manner for increasing bluntness. For the blades tested herein, the sharpness index was found to vary between 0.2 for sharp blades and 0.5 for blunt blades, respectively. To examine the suitability of the index in other cutting configurations, experiments are performed using different blade types, target materials and cutting rates and it is found that the index is independent of the target material and cutting rate and thus pertains to the blade only. In the companion Part II to this paper a finite element model is developed to examine the effect of blade geometry on the sharpness index derived herein.