In-pile electrochemical tests of stainless steel under PWR conditions: Interpretation of electrochemical impedance spectroscopy data

In-pile electrochemical measurements were performed in order to investigate the effect of radiation on the electrochemical corrosion behaviour of AISI 304 and AISI 316 in PWR primary water (400 ppmB and 2 ppmLi) at 300 °C. All measurements were performed on both an in-flux and an out-of-flux three-e...

Full description

Saved in:
Bibliographic Details
Published in:Electrochimica acta 2007-10, Vol.52 (27), p.7538-7544
Main Authors: Bosch, R.-W., Vankeerberghen, M.
Format: Article
Language:English
Subjects:
Applied sciences
EIS
Energy
Energy. Thermal use of fuels
Exact sciences and technology
High temperature electrochemistry
In-pile testing
Installations for energy generation and conversion: thermal and electrical energy
PWR
Stainless steel
Citations: Items that this one cites
Items that cite this one
Online Access:Get full text
Tags: Add Tag
No Tags, Be the first to tag this record!
Description
Summary:In-pile electrochemical measurements were performed in order to investigate the effect of radiation on the electrochemical corrosion behaviour of AISI 304 and AISI 316 in PWR primary water (400 ppmB and 2 ppmLi) at 300 °C. All measurements were performed on both an in-flux and an out-of-flux three-electrode electrochemical cell, each containing a high temperature reference electrode. In this paper we focus on the EIS measurements that have been carried out. The quality of these EIS data varied from good to rather poor as the electrical feed through degraded in time due to the harsh test conditions, i.e., radiation, high temperature and high pressure solution with boric acid and lithium hydroxide. The Nyquist diagrams do change in time, but still reflected the phenomena that took place at the metal–metal oxide-solution interface. The electrical feed through used to electrically isolate the working and reference electrodes from the test rig had a life time of minimum 1 month. The degradation of the connectors resulted in a decrease of the isolation resistance of the electrodes. This could be modelled with an equivalent circuit where the isolation resistance was placed in parallel with the actually equivalent circuit for the working electrode impedance. Measured and simulated Nyquist plots were qualitatively in good agreement and show a difference in the oxide layer structure of the in-flux and out-of-flux electrodes.
ISSN:0013-4686
1873-3859
DOI:10.1016/j.electacta.2007.02.013