Performance of surface footing on geocell-reinforced soft clay beds

• Published in: Geotechnical and geological engineering 2007-10, Vol.25 (5), p.509-524
• Main Authors: Thallak, Sitharam G, Saride, Sireesh, Dash, Sujit Kumar
• Format: Article
• Language: English
• Subjects: Bearing capacity; Bearing strength; Bed load; Carrying capacity; Clay; Load carrying capacity; Model testing; Polymers; Reduction; Scale models; Silt load; Soft clay
• ISSN: 0960-3182; 1573-1529
• DOI: 10.1007/s10706-007-9125-8

This paper presents the results of laboratory model tests carried out to develop an understanding of the behaviour of geocell-reinforced soft clay foundations under circular loading. Natural silty clay was used in this study. The geocells were prepared using biaxial polymer grid. The performance of the reinforced bed is quantified using non-dimensional factors i.e., Bearing capacity improvement factor (If) and Percentage reduction in footing settlement (PRS). The test results demonstrate that the geocell mattress redistributes the footing load over a wider area thereby improving the performance of the footing. The load carrying capacity of the clay bed is increased by a factor of up to about 4.5 times that of unreinforced bed. From the pressure-settlement responses, it is observed that the geocell-reinforced foundation bed behaves as a much stiffer system compared to the unreinforced case indicating that a substantial reduction in footing settlement can be achieved by providing geocell reinforcement in the soft clay bed. The maximum reduction in footing settlement obtained with the provision of geocell mattress of optimum size placed close to the footing is around 90%. Further improvement in performance is obtained with provision of an additional planar geogrid layer at the base of the geocell mattress.