“Flexible-strong” polylactic acid porous membrane via tailored polymerization degree of lactic acid side-chains grafting for passive daytime radiative cooler

• Published in: International journal of biological macromolecules 2024-05, Vol.267, p.131653-131653, Article 131653
• Main Authors: Wang, Yibo, Cheng, Fulin, Liu, Jing, Cai, Wanquan, Ji, Jiawen, Cai, Chenyang, Fu, Yu
• Format: Article
• Language: English
• Subjects: aerogels; ambient temperature; Passive cooling; Physical/chemical modification; Polylactic acid; polymerization; porosity; Porous membrane; reflectance; separation; solar radiation; surface area; tensile strength; transportation
• ISSN: 0141-8130; 1879-0003
• DOI: 10.1016/j.ijbiomac.2024.131653

Aerogel possesses the advantages of high specific surface area, low density, and high porosity, which have shown great application in thermal regulation due to its efficient light scattering capability. However, traditional polymer-based aerogels have poor mechanical properties and lack ductility in outdoor applications, the cooling efficiency of the material is easily affected by damage during transportation, installation, and environmental factors. In this work, combining the porous nature of aerogels and the high ductility of membranes, a polylactic acid-based porous membrane cooler was developed by combining a regular honeycomb surface porous structure design and physical/chemical modification to enhance flexibility, using a simple non-solvent induced phase separation method. This porous membrane exhibits both super-flexibility (116 % elongation at break) and porous characteristics. It achieves a sub-ambient temperature decrease of 4–6 °C under direct sunlight. The optimized porous membrane demonstrates high solar reflectance (94 % of peak reflectivity, 90 % of average reflectivity) and strong infrared emissivity (96 % of peak emissivity, 91 % of average emissivity), it also maintains a solar peak reflectivity of 91 % under 100 % tensile strain and 1000 bending cycles, the cooler still maintains a cooling effect of 2–5 °C below ambient temperature. This work paves the way for developing mechanical flexible and strong radiative coolers for thermal regulation.