Value-added bioproducts by bioethanol dehydrogenation to acetaldehyde through Cu and Zn modified biochar catalysts

• Published in: Environmental technology 2024-08, p.1
• Main Authors: Ob-Eye, Jeerati, Wanmolee, Wanwitoo, Boonyoung, Pawan, Praserthdam, Piyasan, Jongsomjit, Bunjerd
• Format: Article
• Language: English
• ISSN: 1479-487X; 1479-487X
• DOI: 10.1080/09593330.2024.2390151

In this study, the efficiency of a series of biochar-supported Cu catalysts, biochar-supported Zn catalysts, and biochar-supported Cu-Zn catalysts was determined through bioethanol dehydrogenation to the high-value chemical, acetaldehyde. Each metal, with weight percentages of 10, 20, and 30, and the combination of Cu-Zn, including 10 wt% of Cu and Zn, 15 wt% of Cu - 5 wt% of Zn, and 15 wt% of Cu and Zn, were fully loaded onto biochar using an incipient wetness impregnation technique. Subsequently, all biocatalysts were subjected to bioethanol dehydrogenation reactions in a temperature range of 200-400 °C. The optimum metal loading for the catalyst was found to be the combination of 15 wt% Cu and 15 wt% Zn. This catalyst resulted in a reasonable acetaldehyde yield of 56.2%, an initial bioethanol conversion of 57.3%, and a very high acetaldehyde selectivity of 98.1% at a mild reaction temperature of 300 °C and ambient pressure. These results were attributed to the optimal concentration of weak-medium acid and medium base sites. Active acid and base sites were identified through temperature-programmed desorption of ammonia (NH -TPD) and temperature-programmed desorption of carbon dioxide (CO -TPD), respectively. Furthermore, the reaction stability test of the best biocatalyst (15Cu-15Zn/BB) was proven by maintaining this reaction at the same temperature (300 °C) for 10 h. However, the catalytic performance slightly decreased due to the coke formation of Cu species.