Electrochemical Migration Study on Sn-58Bi Lead-Free Solder Alloy Under Dust Contamination

• Published in: Materials 2024-10, Vol.17 (21), p.5172
• Main Authors: Lu, Fuye, Sun, Han, Yang, Wenlong, Zhou, Tianshuo, Wang, Yunpeng, Ma, Haoran, Ma, Haitao, Chen, Jun
• Format: Article
• Language: English
• Subjects: Alloys; Analysis; Anodic dissolution; Chemical elements; Contaminants; Corrosion and anti-corrosives; Corrosion potential; Corrosion products; Corrosion resistance; Corrosion tests; Dissolution; Dust; Electric fields; Electrochemistry; Electrode polarization; Electrodes; Electrolytes; Electronic packaging; Failure; Failure mechanisms; Failure times; Heat resistance; Lead free; Reproducibility; Saline solutions; Sodium chloride; Soldered joints; Solders; Synergistic effect; Tin base alloys; Tin dioxide; Water drops; Water vapor; Work stations; X ray photoelectron spectroscopy
• ISSN: 1996-1944; 1996-1944
• DOI: 10.3390/ma17215172

With the development of electronic packaging technology toward miniaturization, integration, and high reliability, the diameter and pitch of solder joints continue to shrink. Adjacent solder joints are highly susceptible to electrochemical migration (ECM) due to the synergistic effects of high-density electric fields, water vapor, and contaminants. Dust has become one of the non-negligible causal factors in ECM studies due to air pollution. In this study, 0.2 mM/L NaCl and Na SO solutions were used to simulate soluble salt in dust, and the failure mechanism of an Sn-58Bi solder ECM in the soluble salt in dust was analyzed by a water-droplet experimental method. It was shown that the mean failure time of the ECM of an Sn-58Bi solder in an NaCl solution (53 s) was longer than that in an Na SO solution (32 s) due to the difference in the anodic dissolution characteristics in the two soluble salt solutions. XPS analysis revealed that the dendrites produced by the ECM process were mainly composed of Sn, SnO, and SnO , and there were precipitation products-Sn(OH) and Na SO -attached to the dendrites. The corrosion potential in the NaCl solution (-0.351 V) was higher than that in the Na SO solution (-0.360 V), as shown by a polarization test, indicating that the Sn-58Bi solder had better corrosion resistance in the NaCl solution. Therefore, an Sn-58Bi solder has better resistance to electrochemical migration in an NaCl solution compared to an Na SO solution.