The effect of undermatching on crack tip constraint in a welded structure of nodular irons

• Published in: Journal of materials processing technology 2008-03, Vol.198 (1), p.183-190
• Main Authors: Cetinel, Hakan, Aksoy, Tevfik
• Format: Article
• Language: English
• Subjects: CMOD; J-integral; Nodular iron; Stress triaxiality; Undermatching
• ISSN: 0924-0136
• DOI: 10.1016/j.jmatprotec.2007.06.081

The main aim of this paper is to investigate the effect of yield strength mismatch of parent and weld metal on the fracture behavior of plain and heat-treated welded nodular cast iron. For this, experimental and theoretical studies were performed. Nickel electrode, which has lower yield strength value than that of the parent material, was used to join nodular cast iron by cold arc welding method. In experimental study, fracture toughness (J-integral) values were determined for various crack locations including base, weld metal and heat affected zone. In theoretical study, finite element analyses were performed for the same crack locations with different crack lengths. Stress triaxiality and equivalent plastic strain values were determined for all crack locations and various crack lengths. Finally, fracture toughness values of the base metal were determined as lower than those of the other regions including the weld metal and the heat affected zones. Stress triaxiality and equivalent plastic strain values used to clarify the effect of yield strength mismatch on the constraint around crack tip increased with growing crack length in annealed and under-matched models. In annealed models, stress triaxiality values became slightly lower but equivalent plastic strain values appeared higher than those of under-matched models.