Evaluating the use of electrical resistivity imaging technique for improving CH₄ and CO₂ emission rate estimations in landfills

• Published in: The Science of the total environment 2008-01, Vol.389 (2-3), p.522-531
• Main Authors: Georgaki, I, Soupios, P, Sakkas, N, Ververidis, F, Trantas, E, Vallianatos, F, Manios, T
• Format: Article
• Language: English
• Subjects: Analysis methods; Applied sciences; Atmospheric pollution; carbon dioxide; detection; Dispersed sources and other; electrical resistance; Exact sciences and technology; gas emissions; greenhouse gases; image analysis; landfills; leachates; methane; methodology; organic wastes; Pollution; Pollution sources. Measurement results; tomography
• ISSN: 0048-9697; 1879-1026
• DOI: 10.1016/j.scitotenv.2007.08.033

In order to improve the estimation of surface gas emissions in landfill, we evaluated a combination of geophysical and greenhouse gas measurement methodologies. Based on fifteen 2D electrical resistivity tomographies (ERTs), longitudinal cross section images of the buried waste layers were developed, identifying place and cross section size of organic waste (OW), organic waste saturated in leachates (SOW), low organic and non-organic waste. CH₄ and CO₂ emission measurements were then conducted using the static chamber technique at 5 surface points along two tomographies: (a) across a high-emitting area, ERT#2, where different amounts of relatively fresh OW and SOW were detected, and (b) across the oldest (at least eight years) cell in the landfill, ERT#6, with significant amounts of OW. Where the highest emission rates were recorded, they were strongly affected by the thickness of the OW and SOW fraction underneath each gas sampling point. The main reason for lower than expected values was the age of the layered buried waste. Lower than predicted emissions were also attributed to soil condition, which was the case at sampling points with surface ponding, i.e. surface accumulation of leachate (or precipitated water).