Influence of annealing temperature on the nanostructure and corrosivity of Ti/stainless steel substrates

• Published in: Applied surface science 2008-02, Vol.254 (8), p.2528-2533
• Main Authors: Khojier, K., Savaloni, H., Kangarloo, H., Ghoranneviss, M., Yari, M.
• Format: Article
• Language: English
• Subjects: AFM; Annealing; Condensed matter: electronic structure, electrical, magnetic, and optical properties; Condensed matter: structure, mechanical and thermal properties; Corrosion; Cross-disciplinary physics: materials science; rheology; Exact sciences and technology; Physics; Potentiodynamic and galvanometric techniques; SEM; Ti/stainless steel films; XRD
• ISSN: 0169-4332; 1873-5584
• DOI: 10.1016/j.apsusc.2007.09.101

Titanium films of 80 nm thickness were deposited on stainless steel type 304, and they were post-annealed under flow of oxygen at different temperatures. The prepared samples were corrosion tested in 1.0 M H 2SO 4 solution using potentiodynamic and galvanometric polarization technique. The variation of corrosion resistance of these samples showed that the optimum annealing temperature is 473 K. The reduction of corrosion resistance of the sample with increasing the temperature above 473 K is attributed to the phenomena which are confirmed by AFM results: (a) increase of surface roughness, and (b) formation of larger grains with large grooves between them on the film surface. Hence larger effective surfaces for chemical reactions are provided. The films’ crystallographic and morphological structures were analysed using XRD and AFM, respectively before corrosion test and SEM after corrosion test. It is observed that the crystallographic structure of the film goes through a sudden change at 943 K annealing temperature and three phases of titanium oxide (i.e., rutile, anatase and brookite) are formed.