Preparation and properties investigation of PMMA/silica composites derived from silicic acid

• Published in: Polymers for advanced technologies 2009-02, Vol.20 (2), p.84-91
• Main Authors: Fu, H. P., Hong, R. Y., Zhang, Y. J., Li, H. Z., Xu, B., Zheng, Y., Wei, D. G.
• Format: Article
• Language: English
• Subjects: composite; mechanical properties; PMMA; silica; silicic acid
• ISSN: 1042-7147; 1099-1581
• DOI: 10.1002/pat.1226

Hybrid materials based on silicic acid and polymethyl methacrylate (PMMA) were prepared by in situ bulk polymerization of a silicic acid sol and MMA mixture. Silicic acid sol was obtained by tetrahydrofuran (THF) extraction of silicic acid from water. Silicic acid was prepared by hydrolysis and condensation of sodium silicate in the presence of 3.6 M HCl. As a comparative study, PMMA composites filled by silica particles, which were derived from calcining the silicic acid gel, were prepared by a comparable in situ polymerization. Each set of PMMA/silica composites was subjected to thermal and mechanical studies. Residual THF in PMMA/silicic acid composites impacted the properties of the polymer composites. With increase in silica content, the PMMA composites filled with silica particles showed improved thermal and mechanical properties, whereas a decrease in thermal stability and mechanical strength was found for PMMA composites filled with silicic acid dissolved in THF. With a better compatibility with polymer matrix, silicic acid sol shows better reinforcement than silica particles in PMMA films prepared via blending of the corresponding THF solutions. Copyright © 2008 John Wiley & Sons, Ltd.