Microstructure and magnetic properties of bulk amorphous and nanocrystalline Fe61Co10Zr2.5Hf2.5Nb2W2B20 alloy

• Published in: Journal of magnetism and magnetic materials 2008-10, Vol.320 (20), p.e787-e791
• Main Authors: Nabiałek, M., Zbroszczyk, J., Olszewski, J., Hasiak, M., Ciurzyńska, W., Sobczyk, K., Świerczek, J., Kaleta, J., Łukiewska, A.
• Format: Article
• Language: English
• ISSN: 0304-8853
• DOI: 10.1016/j.jmmm.2008.04.046

The microstructure and magnetic properties, i.e. the initial magnetic susceptibility, its disaccommodation, core losses and approach to ferromagnetic saturation of the bulk amorphous and partially crystallized Fe61Co10Zr2.5Hf2.5Nb2W2B20 alloy are studied. From X-ray, Mossbauer spectroscopy and electron microscopy studies we have stated that all samples in the as-quenched state are fully amorphous. However, after annealing the samples at 850 K for 30 min the crystalline alpha-FeCo grains embedded in the amorphous matrix are found. Moreover, from Mossbauer spectra analysis we have stated that the crystalline phase in those samples exhibits the long-range order. The alloy in the as-quenched state shows good thermal stability of the initial magnetic susceptibility. Furthermore, the intensity of the magnetic susceptibility disaccommodation in the rod is lower than in the ribbon. It is due to low quenching rate during the rod preparation which involves the reduction of free volumes. From the analysis of the isochronal disaccommodation curves, assuming the Gaussian distribution of relaxation times, we have found that activation energies of the elementary processes responsible for this phenomenon range from 1.2 to 1.4 eV. After the annealing of the samples the initial susceptibility slightly enhances and disaccommodation drastically decreases. From high-field magnetization studies we have learned that the size of structural defects depends on the quenching rate (the shape of the samples) and changes after annealing.