Behaviour of antimony during thermal treatment of Sb-rich halogenated waste

• Published in: Journal of hazardous materials 2009-07, Vol.166 (2), p.585-593
• Main Authors: Klein, J., Dorge, S., Trouvé, G., Venditti, D., Durécu, S.
• Format: Article
• Language: English
• Subjects: Antimony; Applied sciences; Atmospheric pollution; Chemical engineering; Exact sciences and technology; Flame retardant; Gases - analysis; General processes of purification and dust removal; Halogenation; Hazardous Waste - prevention & control; Hot Temperature; Incineration - methods; Oxidation degree; Oxygen - chemistry; Pilot Projects; Pollution; Prevention and purification methods; Reactors; Refuse Disposal - methods; Spectrophotometry, Atomic; Thermal treatment; Volatilization
• ISSN: 0304-3894; 1873-3336
• DOI: 10.1016/j.jhazmat.2008.12.006

Antimony compounds have a wide range of industrial applications, particularly as additives in flame retardants. To ensure environmentally friendly waste incineration of Sb-rich wastes, it is essential to strengthen the knowledge about the fate of antimony and the potential formation of harmful species. Investigations should be conducted particularly in relation with the main operational parameters controlling the process, chiefly temperature, residence time and air supply in the oven and in the post-combustion zone, prior final adapted cleaning of the flue-gas stream. Experimental studies focusing on antimony behaviour were undertaken through laboratory-scale thermal treatment at 850 °C and 1100 °C of a Sb-rich halogenated waste, originating from the sector of flame retardants formulation. The configuration of our laboratory experimental device allowed to achieve only low oxidative conditions in the waste bed, but high oxidative strength coupled with high temperature and sufficient gas residence time in the post-combustion zone, as prescribed during the incineration of hazardous wastes. Atomic absorption spectroscopy was used to assess the partition of antimony in the different compartments of the process. The oxidation degree of antimony in the gas-phase was determined by the use of electrochemical techniques, namely polarography coupled with anodic stripping voltamperometry. The partition of antimony between the residual ash and the gas-phase under moderate oxidative conditions in the waste bed was constant, whatever the temperature: the volatilization rate for antimony was ∼64%, while a ∼36% fraction remained in the residual bottom ashes. But interestingly, while at 850 °C, antimony was mainly present in the gas-phase at a +III oxidation degree, an increase in temperature of 250 °C favoured the presence of antimony to its highest oxidation degree +V in the flue-gas stream, a valence known to be involved in less toxic species.