Experimental study of the packing of mono-sized spheres subjected to one-dimensional vibration

• Published in: Powder technology 2009-11, Vol.196 (1), p.50-55
• Main Authors: An, X.Z., Li, C.X., Yang, R.Y., Zou, R.P., Yu, A.B.
• Format: Article
• Language: English
• Subjects: Applied sciences; Chemical engineering; Densification; Exact sciences and technology; Miscellaneous; Packing density; Particle packing; Solid-solid systems; Vibration
• ISSN: 0032-5910; 1873-328X
• DOI: 10.1016/j.powtec.2009.06.016

The packing of mono-sized spheres under one-dimensional (1D) vibration is studied experimentally. The effects of operational conditions, such as vibration amplitude A and vibration frequency ω, and feeding method on packing density have been analyzed. The results indicate that there exist optimum values for A and ω to achieve the maximum packing density. The effects of A and ω cannot be represented by a single parameter (i.e. vibration intensity Γ = Aω 2), but should be considered separately. The number of particles fed per batch affects the packing density significantly within a range of one to four layers per batch, but otherwise has no visible effect. Through the extrapolation on packing density using different sized containers, packing density can reach 0.636 in the total feeding method and 0.663 using the batch-wise feeding method. The values, however, are affected by material properties. The experimental results have therefore testified our previous numerical work on the transition from random loose packing to random close packing [An et al., Phys. Rev. Lett. 95, 205502 (2005)]. We report an experimental investigation of the packing of particles under one-dimensional vibration. The results indicate that a proper combination of vibration amplitude and frequency can achieve the maximum packing density. The feeding method can affect the packing density significantly with the maximum packing density of 0.636 in the total feeding method and 0.663 in the batch-wise feeding method. The values increase slightly with steel bearings replacing glass beads. [Display omitted]