Modeling of Out-of-Plane Behavior of Masonry Walls

The flexural behavior of rectangular masonry sections is investigated by considering nonlinear stress-strain in compression and limited-tension material. A preliminary analysis shows that, with variation in the parameters specializing with the adopted conventional constitutive law, the experimentall...

Full description

Saved in:
Bibliographic Details
Published in:Journal of structural engineering (New York, N.Y.) N.Y.), 2009-12, Vol.135 (12), p.1522-1532
Main Authors: Cavaleri, Liborio, Fossetti, Marinella, Papia, Maurizio
Format: Article
Language:English
Subjects:
Approximation
Bearing
Columns (structural)
Compressing
Compression
Compressive strength
Deflection
Ductility
Eccentrics
Equilibrium equations
Exact solutions
Experimentation
Law
Masonry
Masonry materials
Mathematical analysis
Mathematical models
Nonlinearity
Stability analysis
Strain
Stress strain relations
Stress-strain relationships
Structural engineering
TECHNICAL PAPERS
Tensile strength
Walls
Citations: Items that this one cites
Items that cite this one
Online Access:Get full text
Tags: Add Tag
No Tags, Be the first to tag this record!
Description
Summary:The flexural behavior of rectangular masonry sections is investigated by considering nonlinear stress-strain in compression and limited-tension material. A preliminary analysis shows that, with variation in the parameters specializing with the adopted conventional constitutive law, the experimentally observed behavior of different kinds of masonry materials can be approximated. Subsequently, moment-curvature dimensionless curves are derived numerically by satisfying the equilibrium equations of the section. In the case of negligible tensile strength these curves exhibit a typical shape that can be approximated by analytical expressions; consequently, suitable functions are proposed that are governed by only a few parameters which depend on the compression level of the section and the available ductility of the material. The reliability of the proposed modeling procedure is also verified by using the experimental results of a previous study, where masonry elements subjected to an increasing eccentric normal load were considered. Therefore, the analytically defined flexural behavior is transferred to the characteristic sections of a discrete model of slender masonry column, in order to reproduce the experimental results of full-scale tests on bearing masonry walls subjected to increasing lateral deflections for stability analyses. Comments on the results obtained with this model would be useful for further investigations.
ISSN:0733-9445
1943-541X
DOI:10.1061/(ASCE)0733-9445(2009)135:12(1522)