3D-finite element analyses of cusp movements in a human upper premolar, restored with adhesive resin-based composites

• Published in: Journal of biomechanics 2001-10, Vol.34 (10), p.1269-1277
• Main Authors: Ausiello, P., Apicella, A., Davidson, C.L., Rengo, S.
• Format: Article
• Language: English
• Subjects: 3D FEA; Adhesive tooth restorations; Bicuspid - physiology; Composite Resins - standards; Composite Resins - therapeutic use; Dental Bonding - methods; Dental Bonding - standards; Dental Materials; Dental Models; Dental Restoration, Permanent - methods; Dental Restoration, Permanent - standards; Dental Stress Analysis - methods; Elasticity; Finite Element Analysis; Humans; Imaging, Three-Dimensional; Materials Testing; Movement; Occlusal loading; Polymerization shrinkage; Resin-based composites; Stress distribution; Tensile Strength
• ISSN: 0021-9290; 1873-2380
• DOI: 10.1016/S0021-9290(01)00098-7

The combination of diverse materials and complex geometry makes stress distribution analysis in teeth very complicated. Simulation in a computerized model might enable a study of the simultaneous interaction of the many variables. A 3D solid model of a human maxillary premolar was prepared and exported into a 3D-finite element model (FEM). Additionally, a generic class II MOD cavity preparation and restoration was simulated in the FEM model by a proper choice of the mesh volumes. A validation procedure of the FEM model was executed based on a comparison of theoretical calculations and experimental data. Different rigidities were assigned to the adhesive system and restorative materials. Two different stress conditions were simulated: (a) stresses arising from the polymerization shrinkage and (b) stresses resulting from shrinkage stress in combination with vertical occlusal loading. Three different cases were analyzed: a sound tooth, a tooth with a class II MOD cavity, adhesively restored with a high (25 GPa) and one with a low (12.5 GPa) elastic modulus composite. The cusp movements induced by polymerization stress and (over)-functional occlusal loading were evaluated. While cusp displacement was higher for the more rigid composites due to the pre-stressing from polymerization shrinkage, cusp movements turned out to be lower for the more flexible composites in case the restored tooth which was stressed by the occlusal loading. This preliminary study by 3D FEA on adhesively restored teeth with a class II MOD cavity indicated that Young's modulus values of the restorative materials play an essential role in the success of the restoration. Premature failure due to stresses arising from polymerization shrinkage and occlusal loading can be prevented by proper selection and combination of materials.