Electrically actuated, pressure-driven microfluidic pumps

• Published in: Lab on a chip 2003-01, Vol.3 (4), p.217-220
• Main Authors: Munyan, Jason W, Fuentes, Hernan V, Draper, Melissa, Kelly, Ryan T, Woolley, Adam T
• Format: Article
• Language: English
• Subjects: Microcomputers; Nanotechnology; Polymethyl Methacrylate
• ISSN: 1473-0197; 1473-0189
• DOI: 10.1039/b309788a

In order to make the lab-on-a-chip concept a reality, it is desirable to have an integrated component capable of pumping fluids through microchannels. We have developed novel, electrically actuated micropumps and have integrated them with microfluidic systems. These devices utilize the build-up of electrolysis gases to achieve pressure-driven pumping, only require small voltages (approximately 10 V), and have approximate dimensions of 5 cm x 3 cm x 2 cm. Furthermore, these micropumps are composed of relatively inexpensive materials, and the reversible sealability of their poly(dimethylsiloxane) body to different microfluidic arrays enables repeated uses of the same pump. Under an applied potential of 10 V, three different micropumps had average flow rates of 8-13 microL min(-1) for water being pumped through five different 2 cm-long, 5500 microm(2) cross-sectional-area channels in poly(methyl methacrylate), in approximate agreement with predicted pump rates. We have also evaluated pump operation at the lower applied potential of 8 V and observed an average flow rate of 6.1 microL min(-1) for a pump-channel system. The current micropump design is capable of sustaining pumping pressures in the range of 300 kPa. The various advantages of these micropumps make them well suited for use in lab-on-a-chip analysis techniques.