Comprehensive Two-Dimensional Normal-Phase (Adsorption)−Reversed-Phase Liquid Chromatography

• Published in: Analytical chemistry (Washington) 2004-05, Vol.76 (9), p.2525-2530
• Main Authors: Dugo, Paola, Favoino, Olinda, Luppino, Rosario, Dugo, Giovanni, Mondello, Luigi
• Format: Article
• Language: English
• Subjects: Adsorption; Analytical chemistry; Chemistry; Chromatographic methods and physical methods associated with chromatography; Chromatography; Chromatography, High Pressure Liquid - instrumentation; Chromatography, High Pressure Liquid - methods; Citrus - chemistry; Coumarins - analysis; Diodes; Exact sciences and technology; Furocoumarins - analysis; Molecular Structure; Other chromatographic methods; Sensitivity and Specificity; Silicon Dioxide - chemistry; Spectrometric and optical methods
• ISSN: 0003-2700; 1520-6882
• DOI: 10.1021/ac0352981

A comprehensive two-dimensional HPLC system has been developed. It is based on the use of a microbore silica column operated in normal-phase (adsorption) mode (NP) in the first dimension and a monolithic type C18 column operated in reversed-phase (RP) mode in the second dimension. The interface was a 10-port, 2-position valve equipped with two storage loops. The first column was operated at a flow rate of 20 μL/min in isocratic mode, while the monolithic column flow rate was 4 mL/min and was operated in gradient mode. The sample loops had a volume of 20 μL each, and the analysis time in the second dimension was 1 min. In this way, every fraction from the first dimension was transferred on-line to the second dimension switching the automated valve every minute. A photodiode array detector has been used after the secondary column. The use of normal- and reversed-phase mode in the two dimensions can be helpful in the separation of complex mixtures of a natural origin that contain uncharged molecules of comparable dimension, different in polarity and hydrophobicity. The use of a microbore column in the first dimension permits the injection of a small volume in the secondary column, making the transfer of incompatible solvents from the first to the second dimension possible. Since the mobile phase in the NP separation is always stronger than the mobile phase at the head of the secondary column operated in RP mode, the initial eluent strength is important in order to obtain an effective focusing of the sample. The use of a monolithic type column in the second dimension permits the performance of very fast analysis operating at higher flow rates without loss of resolution, due to a higher permeability and increased mass-transfer properties in comparison to conventional particulate columns. Due to the brief reconditioning time necessary for monolithic columns, repetitive gradients can be carried out, extending the field of application to mixtures that contain components with different polarities. The utility of the system has been demonstrated in the analysis of the oxygen heterocyclic fraction of cold-pressed lemon oil, made up of coumarins and psoralens. These components may contain hydroxyl, methoxyl, isopentenyl, isopentenyloxyl, and geranyloxyl groups and oxygen-containing modification of the terpenoid side-chain groups, such as epoxides or vicinal diol groups. The relative location of the components in the 2D plane varied in relation to their chemical struct