Boron-Doped Diamond Microelectrodes for Use in Capillary Electrophoresis with Electrochemical Detection

• Published in: Analytical chemistry (Washington) 2003-06, Vol.75 (11), p.2678-2687
• Main Authors: Cvačka, Josef, Quaiserová, Veronika, Park, JinWoo, Show, Yoshiyuki, Muck, Alexander, Swain, Greg M
• Format: Article
• Language: English
• Subjects: Analytical chemistry; Ascorbic Acid - isolation & purification; Blood vessels; Boron - chemistry; Catechols - isolation & purification; Chemical elements; Chemistry; Chromatographic methods and physical methods associated with chromatography; Diamond - chemistry; Diamonds; Dopamine - isolation & purification; Electrochemical methods; Electrochemistry; Electrodes; Electrophoresis, Capillary - instrumentation; Electrophoresis, Capillary - methods; Exact sciences and technology; Microelectrodes; Other chromatographic methods; Spectrometric and optical methods
• ISSN: 0003-2700; 1520-6882
• DOI: 10.1021/ac030024z

The fabrication and characterization of boron-doped diamond microelectrodes for use in electrochemical detection coupled with capillary electrophoresis (CE−EC) is discussed. The microelectrodes were prepared by coating thin films of polycrystalline diamond on electrochemically sharpened platinum wires (76-, 25-, and 10-μm diameter), using microwave-assisted chemical vapor deposition (CVD). The diamond-coated wires were attached to copper wires (current collectors), and several methods were explored to insulate the cylindrical portion of the electrode:  nail polish, epoxy, polyimide, and polypropylene coatings. The microelectrodes were characterized by scanning electron microscopy, Raman spectroscopy, and cyclic voltammetry. They exhibited low and stable background currents and sigmoidally shaped voltammetric curves for Ru(NH3)6 3+/2+ and Fe(CN)6 3-/4- at low scan rates. The microelectrodes formed with the large diameter Pt and sealed in polypropylene pipet tips were employed for end-column detection in CE. Evaluation of the CE−EC system and the electrode performance were accomplished using a 10 mM phosphate buffer, pH 6.0, run buffer, and a 30-cm-long fused-silica capillary (75-μm i.d.) with dopamine, catechol, and ascorbic acid serving as test analytes. The background current (∼100 pA) and noise (∼3 pA) were measured at different detection potentials and found to be very stable with time. Reproducible separation (elution time) and detection (peak current or area) of dopamine, catecho,l and ascorbic acid were observed with response precisions of 4.1% or less. Calibration curves constructed from the peak area were linear over 4 orders of magnitude, up to a concentration between 0.1 and 1 mM. Mass limits of detection for dopamine and catechol were 1.7 and 2.6 fmol, respectively (S/N = 3). The separation efficiency was ∼33 000, 56 000, and 98 000 plates/m for dopamine, catechol, and ascorbic acid, respectively. In addition, the separation and detection of 1- and 2-naphthol in 160 mM borate buffer, pH 9.2, was investigated. Separation of these two analytes was achieved with efficiencies of 118 000 and 126 000 plates/m, respectively.