Underwater Sound Generation Using Carbon Nanotube Projectors

• Published in: Nano letters 2010-07, Vol.10 (7), p.2374-2380
• Main Authors: Aliev, Ali E, Lima, Marcio D, Fang, Shaoli, Baughman, Ray H
• Format: Article
• Language: English
• Subjects: Condensed matter: structure, mechanical and thermal properties; Cross-disciplinary physics: materials science; rheology; Exact sciences and technology; Materials science; Methods of nanofabrication; Nanocrystalline materials; Nanoscale materials and structures: fabrication and characterization; Nanotubes; Physics; Solid-fluid interfaces; Surfaces and interfaces; thin films and whiskers (structure and nonelectronic properties); Wetting
• ISSN: 1530-6984; 1530-6992
• DOI: 10.1021/nl100235n

The application of solid-state fabricated carbon nanotube sheets as thermoacoustic projectors is extended from air to underwater applications, thereby providing surprising results. While the acoustic generation efficiency of a liquid immersed nanotube sheet is profoundly degraded by nanotube wetting, the hydrophobicity of the nanotube sheets in water results in an air envelope about the nanotubes that increases pressure generation efficiency a hundred-fold over that obtained by immersion in wetting alcohols. Due to nonresonant sound generation, the emission spectrum of a liquid-immersed nanotube sheet varies smoothly over a wide frequency range, 1−105 Hz. The sound projection efficiency of nanotube sheets substantially exceeds that of much heavier and thicker ferroelectric acoustic projectors in the important region below about 4 kHz, and this performance advantage increases with decreasing frequency. While increasing thickness by stacking sheets eventually degrades performance due to decreased ability to rapidly transform thermal energy to acoustic pulses, use of tandem stacking of separated nanotube sheets (that are addressed with phase delay) eliminates this problem. Encapsulating the nanotube sheet projectors in argon provided attractive performance at needed low frequencies, as well as a realized energy conversion efficiency in air of 0.2%, which can be enhanced by increasing the modulation of temperature.