Loading…

Moulded photoplastic probes for near‐field optical applications

The inexpensive fabrication of high‐quality probes for near‐field optical applications is still unsolved although several methods for integrated fabrication have been proposed in the past. A further drawback is the intensity loss of the transmitted light in the ‘cut‐off’ region near the aperture in...

Full description

Saved in:
Bibliographic Details
Published in:Journal of microscopy (Oxford) 2001-04, Vol.202 (1), p.16-21
Main Authors: Kim, B. J., Flamma, J. W., Ten Have, E. S., Garcia‐Parajo, M. F., Van Hulst, N. F., Brugger, J.
Format: Article
Language:English
Subjects:
Citations: Items that this one cites
Items that cite this one
Online Access:Get full text
Tags: Add Tag
No Tags, Be the first to tag this record!
Description
Summary:The inexpensive fabrication of high‐quality probes for near‐field optical applications is still unsolved although several methods for integrated fabrication have been proposed in the past. A further drawback is the intensity loss of the transmitted light in the ‘cut‐off’ region near the aperture in tapered optical fibres typically used as near‐field probes. As a remedy for these limitations we suggest here a new wafer‐scale semibatch microfabrication process for transparent photoplastic probes. The process starts with the fabrication of a pyramidal mould in silicon by using the anisotropic etchant potassium hydroxide. This results in an inverted pyramid limited by silicon crystal planes having an angle of ∼ 54°. The surface including the mould is covered by a ∼ 1.5 nm thick organic monolayer of dodecyltrichlorosilane (DTS) and a 100‐nm thick evaporated aluminium film. Two layers of photoplastic material are then spin‐coated (thereby conformal filling the mould) and structured by lithography to form a cup for the optical fibre microassembly. The photoplastic probes are finally lifted off mechanically from the mould with the aluminium coating. Focused ion beam milling has been used to subsequently form apertures with diameters in the order of 80 nm. The advantage of our method is that the light to the aperture area can be directly coupled into the probe by using existing fibre‐based NSOM set‐ups, without the need for far‐field alignment, which is typically necessary for cantilevered probes. We have evidence that the aluminium layer is considerably smoother compared to the ‘grainy’ layers typically evaporated on free‐standing probes. The optical throughput efficiency was measured to be about 10−4. This new NSOM probe was directly bonded to a tuning fork sensor for the shear force control and the topography of a polymer sample was successfully obtained.
ISSN:0022-2720
1365-2818
DOI:10.1046/j.1365-2818.2001.00820.x