Synthesis and characterization of acrylic terpolymers with RGD peptides for biomedical applications

• Published in: Biomaterials 2004-07, Vol.25 (15), p.2971-2978
• Main Authors: Fussell, Garland W., Cooper, Stuart L.
• Format: Article
• Language: English
• Subjects: Acrylic; Biocompatible Materials - chemistry; Blood Vessel Prosthesis; Chain transfer; Elasticity; Hydrogen-Ion Concentration; Materials Testing; Methacrylates - chemistry; Neutralization; Oligopeptides - chemistry; Polymers - chemistry; RGD; Tensile Strength; Tissue Engineering - instrumentation; Tissue Engineering - methods; Transplants; Vascular grafts; Viscosity
• ISSN: 0142-9612; 1878-5905
• DOI: 10.1016/j.biomaterials.2003.09.062

The goal of this research was to design a biomaterial, using acrylic terpolymers, which could support endothelial cells and function in small diameter vascular graft applications. Hexyl methacrylate (HMA) and octyl methacrylate (OMA) were used as comonomers to produce a material with a low glass transition temperature ( T g). Methacrylic acid (MAA) was used to provide ionic character, and methyl methacrylate (MMA) was selected because of its wide usage in biomedical applications. Cation neutralization was employed to modify the mechanical properties. RGD-based peptide sequences were attached to promote endothelial cell adhesion, because vascular grafts seeded with endothelial cells have fewer problems with thrombosis. The two methods used to incorporate peptide sequences were a chain transfer reaction during polymerization, and a coupling reaction attaching the peptides to carboxyl groups on the polymer after polymerization. The compositions that produced T gs of approximately 0°C were 75 mol% OMA and 92 mol% HMA. The Young's modulus of the HMA copolymer was approximately 0.37 MPa, well below the desired value of 0.9 MPa. Likewise, the Young's modulus of approximately 0.50 MPa for the OMA copolymer was also below the desired value. After partial neutralization with sodium cations, the Young's moduli increased to approximately 0.93 and 0.99 MPa, respectively. The chain transfer reaction lowered the molecular weights and mechanical properties of the copolymers, while the coupling reaction method had little effect on these properties. The chain transfer method appears to be a promising one-step method to produce polymers with a wide range of peptide concentrations.