Cutting performances with new industrial continuous wave ND:YAG high power lasers For dismantling of former nuclear workshops, the performances of recently introduced high power continuous wave ND:YAG lasers are assessed

• Published in: Nuclear engineering and design 2010-10, Vol.240 (10), p.2604-2613
• Main Authors: CHAGNOT, C, DE DINECHIN, G, CANNEAU, G
• Format: Article
• Language: English
• Subjects: Applied sciences; Continuous wave; Controled nuclear fusion plants; Cutting; Dismantling; Energy; Energy. Thermal use of fuels; Exact sciences and technology; Fibers; Fission nuclear power plants; Fuels; Installations for energy generation and conversion: thermal and electrical energy; Lasers; Nuclear fuels; Nuclear power generation; Plates
• ISSN: 0029-5493; 1872-759X
• DOI: 10.1016/j.nucengdes.2010.06.041

Dismantling is a great challenge for nuclear companies which are facing with the cleaning of former nuclear sites. Among the available cutting processes is the multi-kilowatts laser whose power is transmitted through optical fibers. Unlike other cutting processes such as the plasma arc cutting process or the oxy-cutting process, the laser process can be easily implemented by robotic equipments. The mechanised robotic arm carries a laser cutting head to perform, with remote-controlled equipments, the cutting operation. The present study deals with the performances which can be reached with high power continuous wave ND:YAG lasers. The cutting tests were carried out up to 8 kW. The laser power was delivered through a specific power supply chain: a 0.4 mm fiber was transporting the power from the laser to a first interface (coupler) then a second 0.6 mm fiber was bringing the laser power to the cutting head. This solution allowed a power delivery chain whose length could be as high as 100 + 20/50 m. Another advantage of this kind of power supply is that the first fiber can be set in a non-contaminated environment whereas the second fiber lies in the contaminated area. The cutting head used for these tests was a specific tool developed for this laser dismantling work: it is a laser cutting head cooled by pressurized air. This tool was developed with the requirement to be able to sustain a laser power of 14 kW. The pressurized air used to cool the head is also used as cutting gas. The cutting capability was about 10 mm by kW. At the power of 8 kW, austenitic steel plates of thickness 100 mm were cut. These performances were reached with the cut started on the plate's edge. If the cut started in the middle of the plate, the cutting performances were not so high: 8 kW became the power to drill and to cut plates of thickness 40 mm.