Predicting the performance of amorphous and crystalline silicon based photovoltaic solar thermal collectors

• Published in: Energy conversion and management 2011-03, Vol.52 (3), p.1741-1747
• Main Authors: Daghigh, Ronak, Ibrahim, Adnan, Jin, Goh Li, Ruslan, Mohd Hafidz, Sopian, Kamaruzzaman
• Format: Article
• Language: English
• Subjects: Absorber collector; Accumulators; Amorphous silicon; Applied sciences; BIPVT; Collectors; Construction; Crystal structure; Crystalline silicon; Electricity; Energy; Equipments, installations and applications; Exact sciences and technology; Modules; Natural energy; Photovoltaic cells; Photovoltaic conversion; Photovoltaic thermal (PVT); Silicon; Solar cells; Solar energy; Solar thermal conversion; Thermal efficiency
• ISSN: 0196-8904; 1879-2227
• DOI: 10.1016/j.enconman.2010.10.039

BIPVT is an application where solar PV/T modules are integrated into the building structure. System design parameters such as thermal conductivity and fin efficiency, type of cells, type of coolant and operating conditions are factors which influence the performance of BIPVT. Attempts have been made to improve the efficiency of building-integrated photovoltaic thermal (BIPVT). A new design concept of water-based PVT collector for building-integrated applications has been designed and evaluated. The results of simulation study of amorphous silicon (a-Si) PV/T and crystalline silicon (c-Si) module types are based on the metrological condition of Malaysia for a typical day in March. At a flow rate of 0.02 kg/s, solar radiation level between 700 and 900 W/m 2 and ambient temperature between 22 and 32 °C, the electrical, thermal and combined photovoltaic thermal efficiencies for the PV/T (a-Si) were 4.9%, 72% and 77%, respectively. Moreover, the electrical, thermal and combined photovoltaic thermal efficiencies of the PV/T (c-Si) were 11.6%, 51% and 63%.