Loading…

Subsurface sliding wear damage characterization in Al–Si alloys using focused ion beam and cross-sectional TEM techniques

The purpose of the research summarized in this manuscript was to conduct TEM studies of the microstructure that forms at specific locations of worn regions of samples used for bench wear tests and samples extracted from engine blocks using FIB techniques. TEM samples excised from actual wear tracks,...

Full description

Saved in:
Bibliographic Details
Published in:Wear 2011-01, Vol.270 (3), p.152-162
Main Authors: Meng-Burany, X., Perry, T.A., Sachdev, A.K., Alpas, A.T.
Format: Article
Language:English
Subjects:
Citations: Items that this one cites
Items that cite this one
Online Access:Get full text
Tags: Add Tag
No Tags, Be the first to tag this record!
Description
Summary:The purpose of the research summarized in this manuscript was to conduct TEM studies of the microstructure that forms at specific locations of worn regions of samples used for bench wear tests and samples extracted from engine blocks using FIB techniques. TEM samples excised from actual wear tracks, allowed us to image the actual sub-surface damage features and also to conduct a detailed chemical analysis of the very thin surface layer that forms during wear testing. The microstructures that form under ultra-mild wear (UMW) conditions were elucidated. Novel information on the subsurface damage features of UMW that is not readily obtained with conventional microscopy was obtained. The aluminum matrix was heavily deformed in the top few microns below the contact surface, which resulted in the formation of ultrafine grains. Damage to the silicon particles was also observed. Additionally, a tribolayer (or an oil-residue layer) whose thickness increased with sliding cycles, was developed on the contact surfaces. It was concluded that the development of the oil residue layer supported by a layer of ultrafine grain structure was necessary to maintain the very low wear rates. This paper illustrates the distinctive capabilities of using focused ion beam (FIB) techniques to elucidate the microstructure that forms beneath the worn regions of samples subjected to laboratory tests under ultra-mild wear (UMW) conditions and those extracted from specific regions of a worn surface of engine blocks. TEM investigations of cross-sectional samples excised with a focused gallium-ion beam to obtain electron transparency of the first few micrometers of the contact surface were effective in providing novel information on the micromechanisms of UMW that are not readily obtained with conventional microscopy. Two FIB sample preparation techniques, namely the lift-out and H-bar techniques were used to prepare site-specific cross-sectional TEM specimens from Al–11% Si alloys subjected to pin-on-disk and dynamometer tests. In both cases, the aluminum matrix was heavily deformed in the top few micrometers below the contact surface, which resulted in the formation of ultrafine grains. Damage to the silicon particles was also observed. Additionally, a tribolayer (or an oil-residue layer) whose thickness increased with sliding cycles, was developed on the contact surfaces. It was concluded that the development of the oil residue layer supported by a layer of ultrafine grain structure was n
ISSN:0043-1648
1873-2577
DOI:10.1016/j.wear.2010.09.007