Molecular structures and physical properties of heat-drawn conjugate fibers

• Published in: Polymer engineering and science 2011-02, Vol.51 (2), p.232-236
• Main Authors: Oh, Tae Hwan, Han, Sung Soo, Lyoo, Won Seok, Jeon, Han-Yong
• Format: Article
• Language: English
• Subjects: Applied sciences; Conjugates; Crystal structure; Draw ratio; Exact sciences and technology; Fiber reinforced composites; Fibers; Fibers and threads; Folding; Forms of application and semi-finished materials; Melt spinning; Molecular structure; Orientation; Physical properties; Polyethylene terephthalate; Polyethylene terephthalates; Polymer industry, paints, wood; Polymers; Properties; Structure; Technology of polymers
• ISSN: 0032-3888; 1548-2634
• DOI: 10.1002/pen.21810

As‐spun poly(trimethylene terephthalate) (PTT)/poly(ethylene terephthalate) (PET) side‐by‐side conjugate fibers were drawn to investigate the effects of drawing conditions on structure development and physical properties. Effects of draw ratio and heat‐set temperature were observed. In the state of an as‐spun fiber, the molecular orientation of PTT was higher than PET, whereas PET molecular orientation increased remarkably over PTT with increasing draw ratio. Crimp contraction increased sharply at a draw ratio over 2.0, where the crystalline structure of the PET developed sufficiently. A heat‐set temperature of at least 140°C was required to develop sufficient crimp contraction. The crystallinity and orientation of the PET were attributed mainly to the crimp contraction of the drawn fiber. POLYM. ENG. SCI., 2011. © 2010 Society of Plastics Engineers