Measurements, Theories and Simulations of Particle Deposits on Super-Heater Tubes in a CFB Biomass Boiler

• Published in: International journal of green energy 2006-01, Vol.3 (1), p.43-61
• Main Authors: Sandberg, Jan, Sand, Ulf, Bel Fdhila, Rebei
• Format: Article
• Language: English
• Subjects: Applied sciences; Boilers; Computer simulation; Deposit layer viscosity; Deposition; Deposits; Energy; Energy. Thermal use of fuels; Equipments for energy generation and conversion: thermal, electrical, mechanical energy, etc; Eulerian-Lagrangian tracking; Exact sciences and technology; Mathematical models; Particle agglomeration; Particle impingement; Particle sintering; Particle sticking; Particle trajectory simulation; Simulation; Super-heater deposit layers; Temperature dependence; Tubes; Viscosity
• ISSN: 1543-5075; 1543-5083; 1543-5083
• DOI: 10.1080/01971520500439492

The present investigation involves theories, simulations and experiments on deposit layers on super-heater tubes in a circulating fluidised bed in Västerås in Sweden. Simulation of particle trajectories in the vicinity of two super-heater tubes is conducted in a Eulerian-Lagrangian mode for the flue gas and the ash particles from the combustion process. Particle impingements on the tubes are investigated for different particle sizes. Measurements of the buildup of deposit layers in the super-heater environment are conducted using a deposit probe. Deposit layer growth and growth rate is analysed for different probe temperatures, as well as the aspect of sintering on the probe ring surface. Analysis of the probe deposit material and deposits from the super-heaters and from textile filters are chemically analysed. The temperature dependence of the deposit materials viscosity is predicted from the chemical analysis of the samples. A model is included to simulate the effect of the deposit layer thickness on the tube heat exchange. The results from the particle trajectory simulations show that particle larger than 10 mm will mainly impinge on the front of the first tube and that smaller particles are more dispersed due to turbulence and thermophorectic forces, enabling a more even impingement on the whole surface of the tubes. The probe deposit layer growth measurements show significant temperature dependence. The deposit material sintering and distribution is proven to be dependent on; temperature, particle size and exposure time. The stickiness of the deposit material is shown to be dependent on the SiO 2 and alkali relation in the samples, estimated through a viscosity model.