Computational analysis of neutronic parameters for TRIGA Mark-II research reactor using evaluated nuclear data libraries

• Published in: Annals of nuclear energy 2010-03, Vol.37 (3), p.302-309
• Main Authors: Uddin, M.N., Sarker, M.M., Khan, M.J.H., Islam, S.M.A.
• Format: Article
• Language: English
• Subjects: Computer programs; Cross sections; Libraries; Mathematical models; Neutron flux; Nuclear reactor components; Nuclear research reactors; Synthetic aperture radar
• ISSN: 0306-4549; 1873-2100
• DOI: 10.1016/j.anucene.2009.12.012

The aim of this study is to analyze the neutronic parameters of TRIGA Mark-II research reactor using the chain of NJOY-WIMS-CITATION computer codes based on evaluated nuclear data libraries CENDL-2.2 and JEFF-3.1.1. The nuclear data processing code NJOY99.0 has been employed to generate the 69 group WIMS library for the isotopes of TRIGA core. The cell code WIMSD-5B was used to generate the cross sections in CITATION format and then 3-dimensional diffusion code CITTATION was used to calculate the neutronic parameters of the TRIGA Mark-II research reactor. All the analyses were performed using the 7-group macroscopic cross section library. The CITATION test-runs using different cross section sets based on different models applied in WIMS calculations have shown a strong influence of those models on the final integral parameters. Some of the cells were specially treated with PRIZE options available in WIMSD-5B to take into account the fine structure of the flux gradient in the fuel-reflector interface region. It was observed that two basic parameters, the effective multiplication factor, k eff and the thermal neutron flux, were in good agreement among the calculated results with each other as well as the measured values. The maximum power densities at the hot spot were 1.0446E02 W/cc and 1.0426E02 W/cc for the libraries CENDL-2.2 and JEFF-3.1.1 respectively. The calculated total peaking factors 5.793 and 5.745 were compared to the original SAR value of 5.6325 as well as MCNP result. Consequently, this analysis will be helpful to enhance the neutronic calculations and also be used for the further thermal–hydraulics study of the TRIGA core.