Application of nanofluids to a heat pipe liquid-block and the thermoelectric cooling of electronic equipment

• Published in: Experimental thermal and fluid science 2011-10, Vol.35 (7), p.1274-1281
• Main Authors: Putra, Nandy, Yanuar, Iskandar, Ferdiansyah N.
• Format: Article
• Language: English
• Subjects: Applied sciences; Central processing units; Design. Technologies. Operation analysis. Testing; Electronic cooling; Electronics; Exact sciences and technology; Heat pipe liquid-block; Heat pipes; Heat transfer; Integrated circuits; Microprocessors; Nanocomposites; Nanofluid; Nanofluids; Nanomaterials; Nanostructure; Semiconductor electronics. Microelectronics. Optoelectronics. Solid state devices; Thermoelectric; Thermoelectric cooling; Thermoelectricity
• ISSN: 0894-1777; 1879-2286
• DOI: 10.1016/j.expthermflusci.2011.04.015

Microprocessor power dissipation is constantly increasing. An increase in microprocessor size has also resulted in higher heat fluxes. The growth of information technology has rapidly increased over the past few years, causing an increase in the demand for a microprocessor that has a very high computing ability. The previous generation of central processing units (CPU) had 1.17 billion transistors planted in it, which indicates that a significant amount of heat was generated. The total heat dissipation resulting from a high end CPU is approximately 110–140 W, which will increase if the CPU voltage and frequency increase. Conventional air-cooled cooling systems are no longer adequate to remove these heat fluxes. For a number of applications, direct air-cooling systems will have to be replaced or enhanced by other high performance compact cooling techniques. In this study, the application of nanofluids as the working fluid on a heat pipe liquid-block combined with thermoelectric cooling is investigated. The type and effect of volume concentrations of nanofluids, coolant temperature, and thermoelectricsystem as heat pumps of a PC on the CPU’s temperature are considered. The results obtained from this technique are compared to those from other conventional cooling techniques. The heat pipe liquid-block combined with the thermoelectric system has a significant effect on heat transfer from the CPU. The higher thermal performance heat pipe liquid-block and thermoelectric cooled system with nanofluids proved its potential as a working fluid.