Effect of inclination on the convective boiling performance of a microchannel heat sink using HFE-7100

• Published in: Experimental thermal and fluid science 2012, Vol.36, p.143-148
• Main Authors: Wang, Chi-Chuan, Chang, Wen-Jeng, Dai, Chia-Hsing, Lin, Yur-Tsai, Yang, Kai-Shing
• Format: Article
• Language: English
• Subjects: Applied sciences; Convective boiling; Design. Technologies. Operation analysis. Testing; Dielectric fluid; Electronics; Exact sciences and technology; Flow visualization; Fluid dynamics; Fluid flow; Fluids; Heat sink; Heat transfer; Heat transfer coefficients; Inclination; Integrated circuits; Microchannel; Microchannels; Semiconductor electronics. Microelectronics. Optoelectronics. Solid state devices
• ISSN: 0894-1777; 1879-2286
• DOI: 10.1016/j.expthermflusci.2011.09.006

► Effect of inclination on the convective boiling of HFE-7100 in a 825 μm microchannel heat sink. ► The inclinations spans from −90° (vertical downward) to 90° (vertical upward). ► The heat transfer coefficient for the vertical upward and horizontal is comparable. ► The heat transfer coefficient for 45° upward considerably exceeds other configurations. ► Downward arrangements always impair the heat transfer performance. The effect of inclination on the convective boiling heat transfer characteristics of the dielectric fluid HFE-7100 within a multiport microchannel heat sink having a hydraulic diameter of 825 μm is studied. The inclinations spans from −90° (vertical downward) to 90° (vertical upward), and a flow visualization is also conducted in this study. It is found that the heat transfer coefficient for the vertical upward and horizontal is comparable, and the heat transfer coefficient for 45° upward considerably exceeds other configurations. On the other hand, the enhancement of heat transfer coefficient under inclined arrangement is reduced with the rise of mass flux. The results also indicate that downward arrangements always impair the heat transfer performance, and more than 50% deterioration of heat transfer coefficient is encountered for G = 100 kg m −2 s −1 relative to that of 45° arrangement. The flow visualization confirms that the heat transfer augmentation for upward inclination is due to the rise of slug velocity.