Effect of Annealing on Microstructure and Mechanical Properties of Al 0.5 CoCrFeMo x Ni High-Entropy Alloys

• Published in: Entropy (Basel, Switzerland) Switzerland), 2018-10, Vol.20 (11)
• Main Authors: Zhuang, Yan-Xin, Zhang, Xiu-Lan, Gu, Xian-Yu
• Format: Article
• Language: English
• ISSN: 1099-4300

The effect of annealing temperature on the microstructure, phase constituents and mechanical properties of Al CoCrFeMo Ni high-entropy complex alloys has been investigated at a fixed annealing time (10 h). The 600 °C-annealing has no obvious effect on their microstructures, while the annealing at 800-1200 °C enhances the precipitation of (Al,Ni)-rich ordered BCC phase or/and (Cr,Mo)-rich σ phase, and thereby greatly affects the microstructure and mechanical properties of the alloys. All the annealed Al CoCrFeNi alloys are composed of FCC and (Al,Ni)-rich ordered BCC phases; the phase constituent of the Al CoCrFeMo Ni alloy changes from FCC + BCC (600 °C) to FCC + BCC + σ (800 °C) and then to FCC + BCC (1100 °C); the phase constituents of the Al CoCrFeMo Ni and Al CoCrFeMo Ni alloys change from FCC + BCC + σ to FCC + BCC with the annealing temperature rising from 600 to 1200 °C; while all the annealed Al CoCrFeMo Ni and Al CoCrFeMo Ni alloys consist of FCC, BCC and σ phases. The phase constituents of most of the alloys investigated are in good agreement with the calculated results from Thermo-Calc program. The alloys annealed at 800 °C under current investigation conditionshave relative fine precipitations and microstructure, and thereby higher hardness and yield stress.