Microstructure and Defect-Based Fatigue Mechanism Evaluation of Brazed Coaxial Ti/Al 2 O 3 Joints for Enhanced Endoprosthesis Design

• Published in: Materials 2021-12, Vol.14 (24)
• Main Authors: Otto, Johannes L, Fedotov, Ivan, Penyaz, Milena, Schaum, Thorge, Kalenborn, Anke, Kalin, Boris, Sevryukov, Oleg, Walther, Frank
• Format: Article
• Language: English
• ISSN: 1996-1944; 1996-1944

Alumina-based ceramic hip endoprosthesis heads have excellent tribological properties, such as low wear rates. However, stress peaks can occur at the point of contact with the prosthesis stem, increasing the probability of fracture. This risk should be minimized, especially for younger and active patients. Metal elevations at the stem taper after revision surgery without removal of a well-fixed stem are also known to increase the risk of fracture. A solution that also eliminates the need for an adapter sleeve could be a fixed titanium insert in the ceramic ball head, which would be suitable as a damping element to reduce the occurrence of stress peaks. A viable method for producing such a permanent titanium-ceramic joint is brazing. Therefore, a brazing method was developed for coaxial samples, and two modifications were made to the ceramic surface to braze a joint that could withstand high cyclic loading. This cyclic loading was applied in multiple amplitude tests in a self-developed test setup, followed by fractographic studies. Computed tomography and microstructural analyses-such as energy dispersive X-ray spectroscopy-were also used to characterize the process-structure-property relationships. It was found that the cyclic loading capacity can be significantly increased by modification of the surface structure of the ceramic.